Ti合金化钢连铸坯高温力学性能研究Research on the High Temperature Mechanical Properties of Ti Alloyed Steel Continuous Casting Billets
苗 隽, 王群骄, 张秀香, 刘志璞, 何群才, 文小明, 崔洪涛 下载量: 556 浏览量: 807
材料科学 Vol.10 No.8, August 28 2020, PDF, HTML, XML DOI:10.12677/MS.2020.108082 被引量
高级油井管用钢36Mn2V高温力学性能研究Study on High Temperature Mechanical Performance of 36Mn2V Advanced Oil Well Pipe Steel
刘 品, 范黎明, 姚洪昌 下载量: 478 浏览量: 1,637
冶金工程 Vol.7 No.4, December 11 2020, PDF, HTML, XML DOI:10.12677/MEng.2020.74029 被引量
掺聚丙烯混凝土高温力学性能及微观孔隙结构试验Experiments on High Temperature Mechanical Properties and Micropore Structure of Polypropylene Concrete
于 泽, 阎蕊珍 下载量: 648 浏览量: 1,009
土木工程 Vol.9 No.2, February 6 2020, PDF, HTML, XML DOI:10.12677/HJCE.2020.92001 被引量
铸造耐热铝合金耐热相的研究进展Research Progress on Heat-Resistant Phases in Cast Heat-Resistant Aluminum Alloys
程 鹏, 李安敏, 夏静静, 周思理, 吴佳怡 下载量: 48 浏览量: 79 科研立项经费支持
材料科学 Vol.14 No.4, April 26 2024, PDF, HTML, XML DOI:10.12677/ms.2024.144050 被引量
65Mn板坯凝固收缩行为及其影响因素分析Solidification and Shrinkage Behavior of 65Mn Slab and Analysis of the Influencing Factors
王 通, 李晓斐, 孙立根, 王 博, 崔晓健 下载量: 888 浏览量: 2,582 科研立项经费支持
冶金工程 Vol.5 No.2, June 6 2018, PDF, HTML, XML DOI:10.12677/MEng.2018.52010 被引量
石英纤维/含硅芳炔复合材料的制备与性能Preparation and Performance of Quartz Fiber/Silicon-Containing Arylacetylene Composites
肖沅谕, 武元娥, 沙晓涵, 李 松, 张雪梅, 柴笑笑 下载量: 379 浏览量: 1,352
材料科学 Vol.11 No.3, March 29 2021, PDF, HTML, XML DOI:10.12677/MS.2021.113033 被引量
关于收缩率和延伸率间偏差和颈缩分析IAnalysis on Deviation and Necking Formula between the Elongation & Reduction I
许 润, 林水根 下载量: 756 浏览量: 2,251 科研立项经费支持
材料科学 Vol.9 No.1, January 23 2019, PDF, HTML, XML DOI:10.12677/MS.2019.91009 被引量
基于ABAQUS的U型焊缝焊接过程模拟和应力分析 Simulation and Stress Analysis of U-Shaped Seam Welding Process Based on ABAQUS
张宏志, 盛选禹, 候 巍 下载量: 3,911 浏览量: 13,748
建模与仿真 Vol.3 No.2, May 16 2014, PDF, , DOI:10.12677/MOS.2014.32004 被引量
稀土钼合金电子束焊接接头组织研究Research on Microstructure of Electron Beam Welded Joints of Rare Earth-Molybdenum Alloy
安 耿, 孙 军, 孙院军, 朱 琦, 曹维成, 陈国庆 下载量: 783 浏览量: 1,105 科研立项经费支持
材料科学 Vol.9 No.10, October 29 2019, PDF, HTML, XML DOI:10.12677/MS.2019.910117 被引量
T6热处理对挤压态Al-Si-xEr合金组织及性能的影响Effect of T6 Heat Treatment on Microstructure and Properties of Extruded Al-Si-xEr Alloy
赵 娟, 崔晓丽, 崔红卫, 叶 辉 下载量: 761 浏览量: 1,512 国家自然科学基金支持
材料科学 Vol.9 No.12, December 11 2019, PDF, HTML, XML DOI:10.12677/MS.2019.912131 被引量