文章引用说明 更多>> (返回到该文章)

Li, G., Maekita, K., Mitsuno, H., et al. (2015) Over 10 GHz Lateral Silicon Photodetector Fabricated on Silicon-on- Insulator Substrate by CMOS-Compatible Process. Japanese Journal of Applied Physics, 54. https://doi.org/10.7567/jjap.54.04dg06

被以下文章引用:

  • 标题: SOI基RCE光电探测器谐振腔结构的设计与优化Design and Optimization of Resonant Cavity Structure of SOI-Based RCE Photodetectors

    作者: 程彩莉, 刘倩文

    关键字: RCE光电探测器, SOI, 谐振腔, 量子效率RCE Photodetector, SOI, Resonant Cavity, Quantum Efficiency

    期刊名称: 《Optoelectronics》, Vol.6 No.4, 2016-12-05

    摘要: 由于CMOS光电探测器存在量子效率低、工作带宽窄等性能问题,为实现更高量子效率的CMOS光电探测器,结合工艺实现性,本文构建了一种新型的SOI CMOS工艺可兼容的光电探测器谐振腔结构。基于底镜采用一层1/4波长(850 nm光波长)奇数倍厚度SiO2,顶镜采用1/4波长偶数倍厚度SiO2的DBR反射镜,形成的SOI基谐振腔结构适用于光通信850 nm光波长的RCE PD器件。数值仿真结果表明,RCE PD器件比CMOS PD器件提高了量子效率,验证了谐振腔结构的正确性。 Due to the functional problems of CMOS photodetectors such as low quantum efficiency, narrow bandwidth and so on, this paper proposed a new resonant cavity structure compatible with SOI CMOS process to fabricate the CMOS photodetector with a higher quantum efficiency based on process optimization. By adopting the SiO2 with the thickness of odd number of a layer of 1/4 wavelength (850 nm optical wavelength) as the bottom DBR mirror, and using the SiO2 mirror with the thickness of an even multiple of 1/4 wavelength as the top DBR mirror, the SOI resonant cavity structure was prepared and demonstrated being suitable for the PD RCE device with the optical communication wavelength of 850 nm. Numerical simulation results showed that the PD RCE device could improve the quantum efficiency effectively compared with the PD CMOS device, which verifies the correctness of the resonant cavity structure.

在线客服:
对外合作:
联系方式:400-6379-560
投诉建议:feedback@hanspub.org
客服号

人工客服,优惠资讯,稿件咨询
公众号

科技前沿与学术知识分享