文章引用说明 更多>> (返回到该文章)

Kaneno, Y., Wada, M., Inoue, H. and Takasugi, T. (2002) Effects of grain size and temperature on environmental embrittlement of Ni3(Si, Ti) alloys. Autumn Meetings of the Japan Institute of Metals, Nagoya.

被以下文章引用:

  • 标题: 定向凝固Ni-Ni3Si共晶的晶体学择优取向研究Study on the Preferential Orientation of the Directionally Solidified Ni-Ni3Si Eutectic in Situ Composite

    作者: 崔春娟, 薛添, 杨猛, 马晓康

    关键字: 定向凝固, 共晶自生复合材料, 透射电镜, 择优取向Directional Solidification, Eutectic in Situ Composite, Transmission Electron Microscopy, Preferential Orientation

    期刊名称: 《Advances in Condensed Matter Physics》, Vol.3 No.3, 2014-10-31

    摘要: Ni-Ni3Si共晶自生复合材料是一种具有良好的应用前景的高温结构材料。布里奇曼定向凝固技术是制备Ni-Ni3Si共晶复合材料的先进技术之一。在定向凝固过程中,共晶两相长大方向在某一晶体学方向上是优先的,这种择优取向是由系统自动减小其总界面能所致。本文采用透射电镜研究了定向凝固技术制备的Ni-Ni3Si共晶自生复合材料的显微组织结构和晶体学最优生长方向。研究表明Ni-Ni3Si共晶是具有层片组织的规则共晶组织,规则排列的Ni3Si化合物均匀分布在Ni基体上。其晶体学择优方向[110]Ni//[211] Ni3Si, ( 113)Ni//(113)Ni3Si。 The Ni-Ni3Si eutectic in situ composite is a kind of promising high-temperature structural material. Bridgman directional solidification technique is one of the advanced techniques to prepare this material. During directional solidification process, two phases of the eutectic in situ composite grow faster in certain direction. This is caused by the automatic decrease of the total interface energy. In this paper microstructure and preferential orientation of the Ni-Ni3Si eutectic in situ composite are studied by the transmission electron microscopy (TEM). It is found that the Ni-Ni3Si eutectic in situ composite is a kind of regular lamellar eutectic, and the Ni3Si intermetallic is uniformly distributed in the Ni matrix. The preferential orientation of the Ni-Ni3Si eutectic in situ composite prepared by Bridgman directional solidification technique is [110]Ni//[211]Ni3Si, ( 113)Ni//(113)Ni3Si.

在线客服:
对外合作:
联系方式:400-6379-560
投诉建议:feedback@hanspub.org
客服号

人工客服,优惠资讯,稿件咨询
公众号

科技前沿与学术知识分享