浅析大尺寸钢球的加工工艺难点及其改进措施The Difficulty of Processing Technology of the Large Size Steel Ball and Its Improvement Measures
张明松, 朱亿宽, 柯建军, 朱普先
机械工程与技术Vol.2 No.3, 全文下载: PDF HTML DOI:10.12677/MET.2013.23013, August 13 2013
机械滑动工作条件对304不锈钢在人工唾液中腐蚀磨损性能的影响Effect of Mechanical Sliding Working Conditions on the Corrosion and Wear Properties of 304 Stainless Steel in Artificial Saliva
马仲凯, 曹 磊, 万 勇
机械工程与技术Vol.9 No.3, 全文下载: PDF HTML XML DOI:10.12677/MET.2020.93020, May 29 2020
三维固体稳态传热问题的等几何分析Isogeometric Analysis for Steady-State Heat Transfer in Three-Dimensional Solid Problems
毛翊丞, 陈 龙
建模与仿真Vol.12 No.1, 全文下载: PDF HTML XML DOI:10.12677/MOS.2023.121037, January 30 2023
打磨粒度对A7N01P-T4铝合金焊接接头组织及力学性能的影响Effect of Microstructure and Mechanical Properties of Welded Joint of A7N01P-T4 Alloy by Grinding Size
葛怀普, 云中煌, 戴忠晨, 付宁宁, 夏宁, 孙景南, 苟国庆, 覃超
机械工程与技术Vol.6 No.2, 全文下载: PDF HTML XML DOI:10.12677/MET.2017.62022, June 22 2017
打磨粒度对A6061-T6铝合金焊接接头组织及性能的影响Effect of Grinding Granularity on Microstructure and Mechanical Properties of Welded Joint of A6N01 Alloy
云中煌, 戴忠晨, 葛怀普, 付宁宁, 夏宁, 孙景南, 苟国庆, 覃超
机械工程与技术Vol.6 No.2, 全文下载: PDF HTML XML DOI:10.12677/MET.2017.62021, June 22 2017
基于位错密度的Ti-6Al-4V合金表面机械碾磨晶粒细化模型及工艺优化Grain Refinement Modeling Based on Dislocation Density and Optimization for Surface Mechanical Grinding Treatment of Ti-6Al-4V Alloy
付正帆, 邱敬文, 胡忠举, 颜建辉, 刘春轩, 肖务里 国家自然科学基金支持
材料科学Vol.11 No.4, 全文下载: PDF HTML XML DOI:10.12677/MS.2021.114034, April 8 2021