车排子地区石炭系火山岩地震相特征The Characteristics of Seismic Facies of Carboniferous Volcanic in Chepaizi Area
王兆雷, 张吉辉, 邓西里 下载量: 2,641 浏览量: 7,780
地球科学前沿 Vol.5 No.4, August 11 2015, PDF, , XML DOI:10.12677/AG.2015.54028 被引量
配合比参数对箱梁混凝土开裂性能的影响Influence of Mix Proportion Parameters on Cracking Performance of Box Girder Concrete
熊 羽, 苗广营, 郭 飞, 秦鸿根 下载量: 1,798 浏览量: 3,181 科研立项经费支持
土木工程 Vol.5 No.4, July 28 2016, PDF, , XML DOI:10.12677/HJCE.2016.54019 被引量
取向生长TiO2阵列薄膜的致密度和薄膜电阻调控研究Study on Density and Resistance Regulation of Oriented TiO2 Nanorod Array Films
张志成, 曹宇星, 李文睿, 周晓燕, 夏晓红 下载量: 1,871 浏览量: 7,040
材料科学 Vol.7 No.1, January 23 2017, PDF, , XML DOI:10.12677/MS.2017.71018 被引量
大体积混凝土温控防裂技术Temperature Control and Crack Prevention Technology of Mass Concrete
孙胜伟, 黄 欣 下载量: 1,396 浏览量: 2,503
土木工程 Vol.8 No.1, December 28 2018, PDF, HTML, XML DOI:10.12677/HJCE.2019.81003 被引量
基于运载火箭使用环境的超疏水涂层防水防结冰应用研究Application of Super-Hydrophobic Coating on the Waterproof and Anti-Icing Functions Based on the Environment of Space Launch Vehicles
张 薇, 刘长志, 范书群 下载量: 712 浏览量: 1,385
材料科学 Vol.10 No.2, February 12 2020, PDF, HTML, XML DOI:10.12677/MS.2020.102011 被引量
铜镍合金与低合金钢焊接工艺及其应用Welding Technology and Application of Copper-Nickel Alloy and Low Alloy Steel
武保安, 青 旭, 梁立国, 杨晓鹏 下载量: 602 浏览量: 1,627
石油天然气学报 Vol.42 No.2, June 15 2020, PDF, HTML, XML DOI:10.12677/JOGT.2020.422050 被引量
再生剂对沥青胶结料及混合料的再生效果评价Evaluation of Regeneration Effect of Regenerant on Asphalt Binder and Mixture
欧阳勇, 赵伟群 下载量: 372 浏览量: 1,644
材料科学 Vol.11 No.8, August 24 2021, PDF, HTML, XML DOI:10.12677/MS.2021.118109 被引量
PDC钻头激光熔覆性能增强技术研究Research on Laser Cladding Performance Enhancement Technology of PDC Bits
高九华, 高嘉憶, 陈开朗 下载量: 377 浏览量: 637
仪器与设备 Vol.10 No.1, March 14 2022, PDF, HTML, XML DOI:10.12677/IaE.2022.101002 被引量
节镍型奥氏体不锈钢冷轧带折弯开裂原因分析及控制措施Analysis and Control Measures of the Causes of Bending and Cracking of Nickel-Saving Austenitic Cold-Rolled Stainless Steel
尚广浩, 王文杰, 张力萍, 李栋梁, 段才锋, 王立元 下载量: 330 浏览量: 517
材料科学 Vol.12 No.7, July 29 2022, PDF, HTML, XML DOI:10.12677/MS.2022.127077 被引量
热轧低碳钢冷轧边裂原因分析及改善措施Reason Analysis and Improvement Measures for Edge Crack of Hot-Rolled Low Carbon Steel after Cold Rolling
张铭志, 张晓蒙 下载量: 443 浏览量: 1,263
冶金工程 Vol.9 No.3, August 31 2022, PDF, HTML, XML DOI:10.12677/MEng.2022.93027 被引量