利用预应力原理提升龙门机床横梁的抗弯强度Promoting the Bending Strength of the Beam of Gantry Machine Tool by the Principle of Prestress
罗 超, 宋爱平, 张钦搏, 王树凤, 张海滨 下载量: 2,074 浏览量: 3,504 科研立项经费支持
机械工程与技术 Vol.5 No.2, June 30 2016, PDF, , XML DOI:10.12677/MET.2016.52017 被引量
基于粒子群算法的电机公差优化设计Motor Tolerance Optimization Design Based on Particle Swarm Optimization Algorithm
阮天昊 下载量: 276 浏览量: 1,201
建模与仿真 Vol.12 No.2, March 16 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.122105 被引量
基于FLUENT超声振动流场的数值模拟Numerical Simulation of Ultrasonic Vibration Flow Field Based on FLUENT
舒 力, 王 艳 下载量: 506 浏览量: 2,558
建模与仿真 Vol.12 No.3, May 8 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123169 被引量
基于虚拟仿真的线切割实训课程设计Design of WEDM Training Course Based on Virtual Simulation
沈珍珍, 魏国兵, 刘 斌, 王晓君, 李 佳, 刘 静, 金翠红 下载量: 297 浏览量: 437 科研立项经费支持
创新教育研究 Vol.11 No.5, May 31 2023, PDF, HTML, XML DOI:10.12677/CES.2023.115190 被引量
三次三角插值样条曲线的数控插补计算方法An NC Interpolation Calculation Method of Cubic Trigonometric Cardinal Interpolation Spline
张益汉, 宋爱平, 刘祖奇, 邱 林 下载量: 2,629 浏览量: 7,818
机械工程与技术 Vol.4 No.2, June 25 2015, PDF, , XML DOI:10.12677/MET.2015.42016 被引量
复杂光滑曲面的磁射流工具磁场优化Magnetic Field Optimization of Magnetorheological Jet Polishing Tool for Complex Smooth Surfaces
胡 敏, 冯云鹏, 王钟瑛, 杨 昊, 程灏波 下载量: 742 浏览量: 1,115 科研立项经费支持
机械工程与技术 Vol.8 No.6, December 11 2019, PDF, HTML, XML DOI:10.12677/MET.2019.86050 被引量
高速切削镍基高温合金条件下影响毛刺因素的研究Study on the Influence Factors of Burr in High Speed Cutting of Nickel-Base Superalloy
范依航, 吕泽群, 郝兆朋 下载量: 588 浏览量: 1,116 国家自然科学基金支持
机械工程与技术 Vol.9 No.2, April 2 2020, PDF, HTML, XML DOI:10.12677/MET.2020.92009 被引量
基于WPD与功率谱熵的铣削颤振仿真识别Simulation Identification of Milling Chatter Based on WPD and Power Spectrum Entropy
顾于青, 邱彬彬, 李卫东 下载量: 227 浏览量: 385
建模与仿真 Vol.13 No.1, January 19 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.131048 被引量
数控铣床磁流变减振装置及半主动模糊控制Semi-Active Fuzzy Control of the Magneto-Rheological Damping Device for CNC Milling Machine
刘薇娜, 李春梅, 刘志刚 下载量: 1,939 浏览量: 4,757 科研立项经费支持
机械工程与技术 Vol.5 No.4, December 12 2016, PDF, HTML, XML DOI:10.12677/MET.2016.54037 被引量
基于傅立叶变换法的子口径抛光去除函数修正特性分析Analysis of the Correction Characteristics of Sub-Aperture Polishing Function Based on Fourier Transform
郑 楠, 陈贤华, 邓文辉 下载量: 1,017 浏览量: 3,033
光电子 Vol.8 No.4, December 7 2018, PDF, HTML, XML DOI:10.12677/OE.2018.84025 被引量