关于固定管板式换热器不同工况下温度场的数值模拟The Numerical Simulation of the Temperature Field of the Fixed Tube-Plate Heat Exchanger under Different Working Conditions
韩文娟, 甘昌顺, 杨丹丹 下载量: 568 浏览量: 1,482 国家科技经费支持
电力与能源进展 Vol.9 No.5, September 28 2021, PDF, HTML, XML DOI:10.12677/AEPE.2021.95023 被引量
长江口太仓岸段险工成因分析——基于水动力数值模拟的研究Analysis on the Causes of Risk in the Bank Section of Taicang at the Yangtze Estuary—Research on Hydrodynamic Numerical Simulation
张东来, 张东锋 下载量: 483 浏览量: 937 科研立项经费支持
建模与仿真 Vol.10 No.2, May 31 2021, PDF, HTML, XML DOI:10.12677/MOS.2021.102059 被引量
基于SmartRock监测与离散元仿真分析的沥青混合料压密行为研究Research on Compaction Behavior of Asphalt Mixture Based on SmartRock Monitoring and Discrete Element Simulation Analysis
刘天运 下载量: 391 浏览量: 1,288
建模与仿真 Vol.12 No.5, September 6 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.125398 被引量
微型燃烧器扩展角对氢气/空气预混燃烧特性影响的模拟研究Simulation Study on the Influence of Micro Burner Expansion Angle on Hydrogen/Air Premixed Combustion Characteristics
王 卓, 俞志鹏, 姬 鹏, 王 波, 刘梦辉, 孙成喜 下载量: 615 浏览量: 1,676
建模与仿真 Vol.10 No.1, February 10 2021, PDF, HTML, XML DOI:10.12677/MOS.2021.101010 被引量
基于ENVI-Met与Ecotect软件模拟的建筑布局设计探究——以洛阳市某居住区为例Research on Architectural Layout Design Based on ENVI-Met and Ecotect Software Simulation—Taking a Residential Area in Luoyang City as an Example
吴瑞龙, 周沛源, 李婷婷 下载量: 397 浏览量: 2,006
建模与仿真 Vol.12 No.3, May 24 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123225 被引量
D10车型塔状盖板总成二序焊装夹具设计及基于ANSYS WORKBENCH的仿真分析Design of Second Sequence Welding Fixture for Tower Cover Assembly of D10 Model and Simulation Analysis Based on ANSYS WORKBENCH
张 开 下载量: 295 浏览量: 433
建模与仿真 Vol.12 No.3, May 31 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123256 被引量
基于Fluent的内孤立波数值模拟及其作用下顶张力立管动力响应分析Numerical Simulation of Internal Solitary Waves Based on Fluent and Dynamic Response Analysis of Top Tension Risers
韩 慧, 李效民, 王 飞, 郭海燕 下载量: 1,206 浏览量: 2,713 国家科技经费支持
流体动力学 Vol.6 No.4, December 19 2018, PDF, HTML, XML DOI:10.12677/IJFD.2018.64020 被引量
基于全同态加密电子投票方案的研究Research Based on Fully Homomorphic Encrypted Electronic Voting Scheme
胡飞龙, 何明翰, 马广贞, 张 健, 张 平 下载量: 312 浏览量: 482 科研立项经费支持
应用数学进展 Vol.11 No.10, October 12 2022, PDF, HTML, XML DOI:10.12677/AAM.2022.1110745 被引量
基于神经网络的卧螺离心机螺旋流场流速建模Neural Network-Based Modeling of Flow Ve-locity in the Spiral Flow Field of a Decanter Centrifuge
赵曰炜, 丛佩超, 周 栋, 李文彬 下载量: 157 浏览量: 251
建模与仿真 Vol.13 No.2, March 19 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.132122 被引量
基于虚拟仿真技术的多层次模块化课程建设研究——以《航空电子系统》课程为例Research on Multi-Level Modular Curriculum Construction Based on Virtual Simulation Technology—Taking “Avionics System” as an Example
张晓瑜, 陈玖圣 下载量: 348 浏览量: 547 国家科技经费支持
教育进展 Vol.13 No.2, February 6 2023, PDF, HTML, XML DOI:10.12677/AE.2023.132075 被引量