烟气余热直烘脱脂冷轧板可行性分析Feasibility Analysis of Direct Drying Degreasing Cold Rolled Sheet with Flue Gas Waste Heat
陶星伊, 张 瑞, 唐 恩, 罗晓琴, 刘敬褀, 林高翔, 鲁召强, 谢加军 下载量: 407 浏览量: 545
可持续能源 Vol.12 No.4, November 4 2022, PDF, HTML, XML DOI:10.12677/SE.2022.124004 被引量
钽铌管棒线制品加工尺寸公差的控制Control of Dimensional Tolerances in Tantalum Niobium Tube Bar and Wire Products Processing
张志宙, 张亚军, 谢新普 下载量: 1,011 浏览量: 1,445
材料科学 Vol.8 No.9, September 27 2018, PDF, HTML, XML DOI:10.12677/MS.2018.89111 被引量
高速凸轮纯滚动条件下的润滑过程分析Numerical Analysis of Lubrication Process in High-Speed Cam-Roller Contact
何友才, 王 静 下载量: 1,150 浏览量: 3,135
机械工程与技术 Vol.7 No.5, October 31 2018, PDF, HTML, XML DOI:10.12677/MET.2018.75048 被引量
基于盲孔法的焊接空心球节点网架中无缝钢管表面残余应力的测试研究Test and Research on Residual Stress of Rolled Tube and Hollow Ball of Cross Plate Welded Hollow Spherical Joints in Grid Structure Based on Blind Hole Method
韩敬鉴, 雷宏刚, 路国运, 李 洋 下载量: 715 浏览量: 1,031 国家自然科学基金支持
土木工程 Vol.9 No.5, May 7 2020, PDF, HTML, XML DOI:10.12677/HJCE.2020.95040 被引量
铝合金晶界结构控制与钎焊过程晶界渗透行为的研究Control of Grain Boundary Structure of Aluminum Alloy and Grain Boundary Penetration in Brazing Process
林岚荣 下载量: 501 浏览量: 792
材料科学 Vol.11 No.5, May 25 2021, PDF, HTML, XML DOI:10.12677/MS.2021.115071 被引量
PROTOS M5卷烟机接装纸纸边翻折检测装置的研制Development of Edge Folding Detection Device of the Tipping Paper for PROTOS M5 Cigarette Machine
李 俊, 李 敏, 段文龙, 徐 祥 下载量: 476 浏览量: 875
仪器与设备 Vol.9 No.4, December 31 2021, PDF, HTML, XML DOI:10.12677/IaE.2021.94026 被引量
金属锚杆尾部若干改进方法Methods of Improving the Performance of the End of Metal Bolt
张成文, 蔡 猛, 李 飞, 张魏宁 下载量: 2,426 浏览量: 7,369
矿山工程 Vol.3 No.2, April 28 2015, PDF, , XML DOI:10.12677/ME.2015.32009 被引量
二次场算法对于可控源电磁地形问题的适用性研究Research on the Applicability of Secondary Field Algorithm to Terrain Problems of Controlled-Source Electromagnetic Method
杨秉策, 谢 勇 下载量: 120 浏览量: 189
地球科学前沿 Vol.14 No.4, April 15 2024, PDF, HTML, XML DOI:10.12677/ag.2024.144032 被引量
转子–轴承故障多通道振动信号分析方法Multi-Channel Vibration Signal Analysis Method for Rotor-Bearing Faults
卞文慧, 王景玉 下载量: 213 浏览量: 421
建模与仿真 Vol.13 No.1, January 31 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.131085 被引量
大塑性变形工业纯钛的研究现状Research Achievements of Sever Plastic Deformation on Commercially Pure Titanium
吕利强, 王艺超, 李 辉, 杨建朝 下载量: 2,710 浏览量: 10,693
冶金工程 Vol.2 No.2, June 29 2015, PDF, , XML DOI:10.12677/MEng.2015.22016 被引量