探索标准化考试备考课程中课堂写作练习的设计技巧——基于“过程方法(Process Approach)”模型的分析Exploring Techniques of Designing In-Class Writing Drills in Preparatory Courses of Standardized Tests—An Analysis Based upon the Process Approach
陈 晟 下载量: 694 浏览量: 1,774
国外英语考试教学与研究 Vol.2 No.1, March 20 2020, PDF, HTML, XML DOI:10.12677/OETPR.2020.21003 被引量
“引企入教”的探索与实践——以《机车车辆系统动力学与仿真》为例Exploration and Practice of “Introducing Enterprises into Education”—Taking Locomotive & Rolling Stock System Dynamics and Simulation as an Example
孙效杰, 王恒亮, 潘玉娜 下载量: 412 浏览量: 553 科研立项经费支持
创新教育研究 Vol.9 No.5, October 20 2021, PDF, HTML, XML DOI:10.12677/CES.2021.95218 被引量
“课程思政”的探索与实践——以《机车车辆系统动力学与仿真》为例Exploration and Practice of “Courses for Ideological and Political Education” —Taking “Locomotive & Rolling Stock System Dynamics and Simulation” as an Example
孙效杰, 王恒亮, 潘玉娜 下载量: 458 浏览量: 858 科研立项经费支持
创新教育研究 Vol.9 No.6, December 16 2021, PDF, HTML, XML DOI:10.12677/CES.2021.96300 被引量
基于滚环扩增技术耦合切刻内切酶信号放大技术的新型超灵敏miRNA-122荧光传感器A Novel Fluorescent Biosensor for Ultrasensitive Detection of miRNA-122 Based on Rolling Circle Amplification Coupled with Nicking Enzyme Signal Amplification
王煦, 徐成功, 王敬峰, 王玉 下载量: 1,911 浏览量: 4,270
传感器技术与应用 Vol.5 No.4, October 12 2017, PDF, HTML, XML DOI:10.12677/JSTA.2017.54007 被引量
轧机齿轮轴失效原因分析Failure Analysis of Gear Shaft for Rolling Mill
王银国, 刘年富, 孙福猛, 董凤奎, 何健楠 下载量: 2,397 浏览量: 4,868
冶金工程 Vol.3 No.1, March 25 2016, PDF, , XML DOI:10.12677/MEng.2016.31002 被引量
加工工艺及热处理对钛合金板材织构影响的研究现状Research Situation on the Effect of Manufacturing Process and Heat Treatment on the Titanium Alloy Sheet Texture
刘松良, 卢影锋, 黄先明, 沙春鹏, 邢秋丽, 唐 进 下载量: 2,678 浏览量: 7,656
冶金工程 Vol.2 No.3, September 16 2015, PDF, , XML DOI:10.12677/MEng.2015.23021 被引量
冷轧加工率及退火温度对5383铝合金板材力学和腐蚀性能影响研究 Effect of Cold Rolling and Annealing Temperature on Mechanical and Corrosion Properties of 5383 Aluminum Alloy Sheet
陈卫嘉, 黄文辉, 杨雨浩, 苏开列 下载量: 354 浏览量: 515 科研立项经费支持
材料科学 Vol.13 No.8, August 11 2023, PDF, HTML, XML DOI:10.12677/MS.2023.138083 被引量
船体结构用钢认证工艺控制实践Practice of Certification Process Control for Hull Structural Steel
周松明, 汪 晛, 王小燕, 王孝东 下载量: 437 浏览量: 1,610
冶金工程 Vol.9 No.1, March 18 2022, PDF, HTML, XML DOI:10.12677/MEng.2022.91010 被引量
3104铝合金冷轧织构调控及其制耳减小方法A Earing Control Method for 3104 Aluminum Alloy Sheet through Cold Rolling Texture Modification
胡卓超, 张宇东, 左良, 王福 下载量: 3,855 浏览量: 10,043
材料科学 Vol.1 No.3, October 28 2011, PDF, , XML DOI:10.12677/ms.2011.13018 被引量
单螺杆膨胀机基元容积膨胀过程两相流模拟研究Simulation Study on the Two-Phase Flow in the Expansion Process of Basic Element Volume of Single Screw Expander
沈丽丽, 吴玉庭, 王 伟, 雷 标, 智瑞平 下载量: 484 浏览量: 1,087 国家自然科学基金支持
机械工程与技术 Vol.10 No.2, April 19 2021, PDF, HTML, XML DOI:10.12677/MET.2021.102022 被引量