45Cr9Si3气阀钢电渣锭、轧制及退火过程中碳化物析出行为Precipitation Behavior of Carbides in 45Cr9Si3 Valve Steel During ESR, Rolling and Annealing Process
刘东风, 郭 靖, 郭汉杰, 杨文晟, 段生朝 下载量: 598 浏览量: 1,705
材料科学 Vol.10 No.11, November 20 2020, PDF, HTML, XML DOI:10.12677/MS.2020.1011107 被引量
深冷处理顺序对EM35工具钢组织性能的影响Effect of the Sequence of Cryogenic Treatment on Microstructure and Performance of EM35 Tool Steel
张国立, 李伟秋, 彭继华, 廖靖雯, 肖 扬, 楚高洁 下载量: 423 浏览量: 636 科研立项经费支持
材料科学 Vol.11 No.10, October 26 2021, PDF, HTML, XML DOI:10.12677/MS.2021.1110127 被引量
康德的“智性直观”与牟宗三的“智的直觉”—认识论与存有论两种理论视域下的道德哲学Kant’s “die intellektuelle Anschauung” and Mou Zongsan’s “the Intellectual Intuition”—The Moral Philosophy in the Views of Epistemology and Ontology
胡 磊 下载量: 2,266 浏览量: 6,939 国家科技经费支持
哲学进展 Vol.5 No.2, April 12 2016, PDF, , XML DOI:10.12677/ACPP.2016.52004 被引量
针对机场线华泾站地下连续墙接头形式的变更研究Research on the Change of the Joint Form of the Underground Diaphragm Wall of Huajing Station of the Airport Line
陈 勇 下载量: 88 浏览量: 145
土木工程 Vol.13 No.3, March 28 2024, PDF, HTML, XML DOI:10.12677/hjce.2024.133031 被引量
复合镗铣加工中心双刀库可视化设计界面The Visual Design of the Double Knife Bank of the Compound Boring and Milling Center
刘 江, 孙建业 下载量: 2,068 浏览量: 4,965
机械工程与技术 Vol.5 No.2, May 31 2016, PDF, , XML DOI:10.12677/MET.2016.52008 被引量
采用改进人工蜂群算法的低碳铣削参数优化Optimization of Low Carbon Milling Parameters Using Improved Artificial Bee Colony Algorithm
聂俊争, 李仁旺 下载量: 343 浏览量: 624 国家自然科学基金支持
建模与仿真 Vol.12 No.2, March 29 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.122143 被引量
数控铣床磁流变减振装置及半主动模糊控制Semi-Active Fuzzy Control of the Magneto-Rheological Damping Device for CNC Milling Machine
刘薇娜, 李春梅, 刘志刚 下载量: 1,940 浏览量: 4,759 科研立项经费支持
机械工程与技术 Vol.5 No.4, December 12 2016, PDF, HTML, XML DOI:10.12677/MET.2016.54037 被引量
材料成型及控制工程课程思政建设探索——以《锻造工艺与模具设计》课程为例Exploration on Ideological and Political Construction of Material Forming and Control Engineering Course—Taking Forging Technology and Die Design Course as an Example
龙 帅, 彭 鹏, 杨青山, 喻祖建, 戴庆伟 下载量: 396 浏览量: 2,549
创新教育研究 Vol.10 No.10, October 19 2022, PDF, HTML, XML DOI:10.12677/CES.2022.1010387 被引量
环形刀铣削复杂曲面路径规划Tool Path Planning for High Speed Milling of Sculpture Surface with Toroidal Cutter
刘 航, 刘美余 下载量: 3,328 浏览量: 10,606
建模与仿真 Vol.2 No.3, July 30 2013, PDF, , DOI:10.12677/MOS.2013.23005 被引量
考虑配钢的混凝土徐变换算弹性模量Creep-Transformed Elastic Modulus of Concrete Considering Steel
陈 旭, 毛德均, 兰树伟 下载量: 398 浏览量: 3,278 国家自然科学基金支持
土木工程 Vol.12 No.7, July 18 2023, PDF, HTML, XML DOI:10.12677/HJCE.2023.127112 被引量