基于有限元仿真铝基碳化硅磨削参数研究Research on Grinding Parameters of Aluminum-Based Silicon Carbide Based on Finite Element Simulation
倪安杰 下载量: 209 浏览量: 366
建模与仿真 Vol.13 No.1, January 25 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.131059 被引量
基于有限元仿真的三芯海底电缆温度场分析Analysis of Temperature Field of Three-Core Submarine Cable Based on Finite Element Simulation
刘晓亮, 魏 俊 下载量: 496 浏览量: 1,185
电气工程 Vol.10 No.1, March 30 2022, PDF, HTML, XML DOI:10.12677/JEE.2022.101004 被引量
管材远场涡流有限元仿真及内外壁缺陷检测灵敏度分析Finite Element Simulation for Remote Field Eddy Current and Detection Sensitivity Analysis for Inner and Outer Defect
徐小杰 下载量: 2,879 浏览量: 8,927 国家自然科学基金支持
材料科学 Vol.4 No.6, November 27 2014, PDF, , DOI:10.12677/MS.2014.46036 被引量
基于Plant Simulation的手工装配线研究Research on Manual Assembly Lines Based on Plant Simulation
邹福莉 下载量: 273 浏览量: 498
建模与仿真 Vol.12 No.3, April 18 2023, PDF, , DOI:10.12677/MOS.2023.123160 被引量
基于有限单元法的可倾瓦轴承轴心轨迹仿真Axis Orbit Simulation of Tilt-Pad Bearing Based on the Finite Element Method
赵 毅, 刘秀波 下载量: 2,312 浏览量: 6,751
机械工程与技术 Vol.5 No.1, March 24 2016, PDF, , XML DOI:10.12677/MET.2016.51004 被引量
基于ANSYS的拨叉的有限元分析及拓扑优化Finite Element Analysis and Topology Optimization of Fork Based on ANSYS
南郡 下载量: 398 浏览量: 845
建模与仿真 Vol.11 No.6, November 18 2022, PDF, HTML, XML DOI:10.12677/MOS.2022.116144 被引量
齿面喷丸强化后表面微观形貌仿真分析Simulation Analysis on Micro-Morphology of Tooth Surface after Shot Peening
余墨涵, 李新友, 李关辉 下载量: 1,215 浏览量: 3,980
建模与仿真 Vol.8 No.2, May 28 2019, PDF, HTML, XML DOI:10.12677/MOS.2019.82008 被引量
基于有限元模拟的土工格室加筋基层力学响应及工程应用研究Research on Mechanical Response and Engineering Application of Geocell Reinforced Base Based on Finite Element Simulation
何新平, 兰 虎, 刘 瑾, 何美美, 刘安述, 延丽丽 下载量: 323 浏览量: 498
土木工程 Vol.12 No.8, August 25 2023, PDF, HTML, XML DOI:10.12677/HJCE.2023.128125 被引量
可燃冰沉积物力学特性的离散元模拟分析Discrete Element Simulation Analysis of Mechanical Behavior of the Gas Hydrate-Bearing Sediments
王宏乾, 周 博, 薛世峰, 林英松 下载量: 1,199 浏览量: 2,671 科研立项经费支持
力学研究 Vol.7 No.3, August 31 2018, PDF, HTML, XML DOI:10.12677/IJM.2018.73010 被引量
基于ABAQUS的盘式制动器有限元分析Finite Element Analysis of Brake Disc Based on ABAQUS
马靖凯 下载量: 175 浏览量: 345
建模与仿真 Vol.13 No.2, March 29 2024, PDF, HTML, XML DOI:10.12677/mos.2024.132174 被引量