氧化还原法制备微米多孔银丝及其表面增强拉曼散射研究Preparation of Micron-Porous Silver Wire by Oxidation-Reduction Method and Its Surface-Enhanced Raman Scattering Review
赵梦阳 下载量: 446 浏览量: 741
物理化学进展 Vol.11 No.2, May 31 2022, PDF, HTML, XML DOI:10.12677/JAPC.2022.112009 被引量
涨圈主密封面润滑状态判断及影响因素分析Judgment of Lubrication State of Main Sealing Surface of Piston Ring and Analysis of Influencing Factors
李神龙, 嵇佳佳 下载量: 331 浏览量: 963
机械工程与技术 Vol.11 No.2, April 28 2022, PDF, HTML, XML DOI:10.12677/MET.2022.112022 被引量
光学元器件磁辅助抛光特性探究Exploration of Magnetic Assisted Polishing Characteristics of Optical Components
李 壮 下载量: 85 浏览量: 133
建模与仿真 Vol.13 No.3, May 16 2024, PDF, HTML, XML DOI:10.12677/mos.2024.133202 被引量
硬质涂层滚刀切削高温区及失效机理研究Study on the Heat Affected Zone and the Failure Mechanism of Hard Coated Hob
彭继华, 成 伟, 黄现章 下载量: 970 浏览量: 2,015 科研立项经费支持
材料科学 Vol.9 No.1, January 25 2019, PDF, HTML, XML DOI:10.12677/MS.2019.91012 被引量
飞秒激光抛光6H碳化硅硅面实验研究Experimental Study on 6H Silicon Carbide Silicon-Face Polished by Femtosecond Laser
陈高攀, 李俭国, 罗海梅, 周 艳, 罗桂海, 谢小柱, 潘国顺 下载量: 895 浏览量: 3,203 国家科技经费支持
机械工程与技术 Vol.9 No.2, April 28 2020, PDF, HTML, XML DOI:10.12677/MET.2020.92019 被引量
针式形磁性复合流体抛光工具设计及工艺试验Design and Process Test of Needle-Shaped Magnetic Composite Fluid Polishing Tool
刘 剑, 彭 婷, 王璐璐 下载量: 395 浏览量: 558
建模与仿真 Vol.11 No.3, May 9 2022, PDF, HTML, XML DOI:10.12677/MOS.2022.113046 被引量
SiCp/Al复合材料磨削去除形式及表面损伤研究Research on Grinding Removal Form and Surface Damage of SiCp/Al Composites
苗龙泉 下载量: 360 浏览量: 548
建模与仿真 Vol.12 No.3, May 29 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123243 被引量
应用于一体化芯片晶圆级集成的铜孔表面平坦化工艺设计与实现 Design and Implementation of Copper Hole Surface Flattening Technology for Integrated Chip Wafer
潘代强, 周 洲, 姜 喆 下载量: 329 浏览量: 779
传感器技术与应用 Vol.11 No.4, July 13 2023, PDF, HTML, XML DOI:10.12677/JSTA.2023.114037 被引量
轧辊表面毛化应力的数值模拟与研究Numerical Simulation and Study of Stress for Rolling Textured Surface
卫芳芳, 张少睿 下载量: 2,050 浏览量: 5,862 科研立项经费支持
机械工程与技术 Vol.4 No.4, December 30 2015, PDF, , XML DOI:10.12677/MET.2015.44029 被引量
内螺纹铣削加工精度的试验研究Vibration Experiment and Analysis of Large Diameter Internal Thread in Milling
卜庆旭, 金成哲, 逄 迪 下载量: 558 浏览量: 1,647
机械工程与技术 Vol.9 No.3, June 18 2020, PDF, HTML, XML DOI:10.12677/MET.2020.93028 被引量