截面填充率对部分填充钢箱–混凝土拱受力性能的影响分析Analysis of the Influence of Section Filling Rate on the Mechanical Performance of Partially Filled Steel Box-Concrete Arch
肖锦文, 邹中权 下载量: 538 浏览量: 738 科研立项经费支持
土木工程 Vol.9 No.10, October 14 2020, PDF, HTML, XML DOI:10.12677/HJCE.2020.910105 被引量
预处理对Al-Mg-Si合金蠕变时效行为及力学性能的影响Effects of Pre-Treatments on Creep Aging Behaviors and Mechanical Properties of Al-Mg-Si Alloy
罗书径, 邓运来, 戴青松, 王 宇 下载量: 619 浏览量: 884 科研立项经费支持
材料科学 Vol.11 No.1, January 27 2021, PDF, HTML, XML DOI:10.12677/MS.2021.111006 被引量
预应力矮肋T梁桥跨中横隔梁力学性能及计算方法分析Analysis of Mechanical Properties and Calculation Method of Mid-Span Transverse Beam of Prestressed Low-Ribbed T-Beam Bridge
王思佳, 于天来 下载量: 968 浏览量: 3,664
土木工程 Vol.8 No.4, June 26 2019, PDF, HTML, XML DOI:10.12677/HJCE.2019.84102 被引量
P-ECC-RC组合柱偏心受压力学性能仿真分析Simulation Analysis of the Mechanical Properties of P-ECC-RC Composite Columns under Eccentric Compression
齐勇强, 袁家权, 江维洪, 段文红, 熊 力, 黄晓敏, 许维炳 下载量: 53 浏览量: 84
土木工程 Vol.13 No.5, May 29 2024, PDF, HTML, XML DOI:10.12677/hjce.2024.135077 被引量
直流电沉积锌镍镀层钕铁硼的抗腐蚀性及镀层结合力研究 Corrosion Resistance and Mechanical Properties of ZnNi Coatings Deposited by DC Electrodeposition on NdFeB Surface
洪至强, 王晓玲, 赵树国, 左志军, 夏林, 郑立允 下载量: 250 浏览量: 515 国家科技经费支持
材料科学 Vol.13 No.4, April 27 2023, PDF, HTML, XML DOI:10.12677/MS.2023.134036 被引量
“适应需求导向,突出应用能力”的《画法几何及机械制图》课程改革与实践Reform and Practice of the “Descriptive Geometry and Mechanical Drawing” for Adapting to Demand Orientation and Highlighting Application Ability
马 宁, 孙 岩, 单宝峰 下载量: 531 浏览量: 790 科研立项经费支持
创新教育研究 Vol.8 No.5, October 29 2020, PDF, HTML, XML DOI:10.12677/CES.2020.85137 被引量
高强螺栓端板连接钢管柱节点在循环荷载作用下的力学性能分析Performance Investigation on Mechanical Properties of End Plate Connection with High-Strength Bolts under Cyclic Loading
李晓磊, 王志宇 下载量: 1,078 浏览量: 2,919
土木工程 Vol.7 No.3, May 29 2018, PDF, HTML, XML DOI:10.12677/HJCE.2018.73055 被引量
“体系构建、项目驱动、实践环境”三位一体,机械类专业应用型人才培养体系构建The Trinity of “System Construction, Project Driven and Practice Environment” Construction of Training System for Applied Talents of Mechanical Specialty
孙树礼 下载量: 243 浏览量: 338
教育进展 Vol.12 No.9, September 23 2022, PDF, HTML, XML DOI:10.12677/AE.2022.129543 被引量
多工位梁柱型家具构件成形机床控制系统的研究Research on the Control System of Multi-Station Beam and Column Furniture Component Forming Machine
陈叶叶, 王 健 下载量: 342 浏览量: 443 科研立项经费支持
机械工程与技术 Vol.11 No.3, June 30 2022, PDF, , DOI:10.12677/MET.2022.113035 被引量
C-xFe2O3对粉末冶金Fe-18Mn-3Cu-C高锰无磁钢微观组织和力学性能的影响Effect of C-xFe2O3 on Microstructure and Mechanical Properties of Powder Metallurgy Fe-18Mn-3Cu-C High Manganese Non-Magnetic Steel
朱权利, 韩 杰, 陈家坚, 邹世龙 下载量: 544 浏览量: 709
材料科学 Vol.11 No.4, April 19 2021, PDF, HTML, XML DOI:10.12677/MS.2021.114045 被引量