U型冻结法在大直径泥水盾构接收中的应用研究Research on the Application of U-Shaped Freezing Method in the Receiving of Large-Diameter Slurry Shields
罗赛楠 下载量: 122 浏览量: 183
土木工程 Vol.13 No.4, April 18 2024, PDF, HTML, XML DOI:10.12677/hjce.2024.134044 被引量
毛竹材立杆高度对竹壁厚度、竹秆直径以及表面元素分布影响研究The Study of the Effect of Bamboo Stem Height on Thickness, Diameter and Surface Element Distribution of Bamboo Stem
戴月萍, 于红卫, 沈哲红 下载量: 439 浏览量: 617 科研立项经费支持
林业世界 Vol.11 No.3, July 27 2022, PDF, HTML, XML DOI:10.12677/WJF.2022.113020 被引量
浅覆土超大直径盾构上浮与诱发地表隆起机理研究Mechanisms of Uplift of Super-Large-Diameter Shield Tunnel in Shallowly Buried Condition and Its Induced Surface Heave
苏稚寅, 覃 鹏 下载量: 107 浏览量: 173 科研立项经费支持
地球科学前沿 Vol.14 No.4, April 26 2024, PDF, HTML, XML DOI:10.12677/ag.2024.144041 被引量
浅埋超大直径盾构隧道施工上浮控制技术研究Research on Uplift Control Technology of Shallowly Buried Super-Large-Diameter Shield Tunnel Construction
苏稚寅 下载量: 118 浏览量: 209 科研立项经费支持
土木工程 Vol.13 No.4, April 23 2024, PDF, HTML, XML DOI:10.12677/hjce.2024.134048 被引量
大直径气动反循环潜孔锤国内外研究进展及关键技术Research Progress and Key Technology of Large Diameter Pneumatic Reverse Circulation DTH Hammer at Home and Abroad
李永华, 吴 浩, 马文其 下载量: 410 浏览量: 777
矿山工程 Vol.11 No.1, January 31 2023, PDF, HTML, XML DOI:10.12677/ME.2023.111012 被引量
杭锦旗地区X区块盒一段孔隙度在严重扩径和非严重扩径条件下的校正方法研究Paper Study on the Correction Method of Porosity of the First Member of the First Block of the X Block in Hangjinqi Area under Severe and Non-Serious Diameter Expansion
刘 锋, 杨 斌, 张 鹏, 张智南 下载量: 433 浏览量: 556
地球科学前沿 Vol.11 No.1, January 28 2021, PDF, HTML, XML DOI:10.12677/AG.2021.111004 被引量
血清BNP水平及左房内径对脑梗死合并阵发性房颤的辅助诊断价值Diagnostic Value of Serum BNP and Left Atrial Diameter in Paroxysmal Atrial Fibrillation with Cerebral Embolism
金玄美, 马爱军, 潘旭东 下载量: 458 浏览量: 624
临床医学进展 Vol.11 No.1, January 21 2021, PDF, HTML, XML DOI:10.12677/ACM.2021.111028 被引量
伴右向左分流的偏头痛患者左房前后径与脑白质病变的相关研究Association between Left Atrial Anterior-Posterior Diameter and White Matter Hyperintensities in Migraineurs with Right-to-Left-Shunt
张 健, 江 毅, 单体茹, 赵洪芹 下载量: 159 浏览量: 258
临床医学进展 Vol.14 No.2, February 22 2024, PDF, HTML, XML DOI:10.12677/ACM.2024.142470 被引量
内螺纹铣削加工精度的试验研究Vibration Experiment and Analysis of Large Diameter Internal Thread in Milling
卜庆旭, 金成哲, 逄 迪 下载量: 560 浏览量: 1,651
机械工程与技术 Vol.9 No.3, June 18 2020, PDF, HTML, XML DOI:10.12677/MET.2020.93028 被引量
小直径单圈图的永久和指标的极值研究Extremal Unicyclic Graphs of the Small Diameter with Respect to Permanental Sum
白英刚 下载量: 385 浏览量: 511 科研立项经费支持
理论数学 Vol.11 No.11, November 30 2021, PDF, , DOI:10.12677/PM.2021.1111216 被引量