基于特征工件的五轴数控机床动静态误差辨识与分离方法Dynamic and Static Error Identification and Separation Method for Five-Axis CNC Machine Tools Based on Feature Workpiece
梁喆程, 刘 超 下载量: 178 浏览量: 298
机械工程与技术 Vol.13 No.1, February 23 2024, PDF, HTML, XML DOI:10.12677/MET.2024.131001 被引量
叶轮加工中心X轴滑座动态特性分析与优化Dynamic Characteristic Analysis and Optimization of the X Axis Slide of Impeller Machining Center
陈达 下载量: 1,927 浏览量: 3,234 国家科技经费支持
机械工程与技术 Vol.5 No.3, September 26 2016, PDF, , XML DOI:10.12677/MET.2016.53025 被引量
同步超声复合电加工振动监测与加电间隙控制Vibration Monitoring and Inter-Electrode Gap Controlling of Synchronizing Ultrasonic Compound Electric Machining
邓正泉, 王 芳, 朱永伟 下载量: 2,216 浏览量: 7,599 国家自然科学基金支持
机械工程与技术 Vol.4 No.4, December 11 2015, PDF, , XML DOI:10.12677/MET.2015.44026 被引量
高去除率工艺下的机床速度优化方法研究Research on Machine Tool Speed Optimization Methods under High Removal Rate Processes
徐 峰, 徐建亮, 陈希慧 下载量: 322 浏览量: 887 科研立项经费支持
动力系统与控制 Vol.12 No.2, April 29 2023, PDF, HTML, XML DOI:10.12677/DSC.2023.122012 被引量
高职数控技术专业建设研究——以广西英华国际职业学院为例Research on the Implementation of CNC Technology in Higher Vocational Colleges: A Case Study of Guangxi Yinghua International Vocational College
邱清华, 邓绍云, 黄日进 下载量: 11 浏览量: 23 科研立项经费支持
教育进展 Vol.14 No.6, June 13 2024, PDF, , XML DOI:10.12677/ae.2024.146905 被引量
航空薄壁件加工变形研究现状分析Research Status of Machining Deformation in Aeronautical Thin-Walled Parts
于 金, 王胤棋 下载量: 857 浏览量: 2,348 科研立项经费支持
机械工程与技术 Vol.8 No.5, October 17 2019, PDF, HTML, XML DOI:10.12677/MET.2019.85046 被引量
电化学加工工艺知识管理平台框架的分析与构建Analysis and Construction of Knowledge Management Platform Framework for Electrochemical Machining Process
季 峰, 刘铭鑫, Ali Abdullahi Moallim 下载量: 382 浏览量: 910 科研立项经费支持
软件工程与应用 Vol.11 No.6, December 30 2022, PDF, HTML, XML DOI:10.12677/SEA.2022.116146 被引量
五轴联动加工中局部轨迹优化方法Local Tool Path Optimization Method for Five-Axis Linkage in Machining
吴志清 下载量: 1,374 浏览量: 2,681 科研立项经费支持
动力系统与控制 Vol.6 No.2, April 30 2017, PDF, , XML DOI:10.12677/DSC.2017.62010 被引量
“互联网+”视域下高职智慧课堂教学模式的研究与应用——以《数控加工与编程》课程为例Research and Application of the Intelligent Classroom Teaching Mode in Higher Vocational Education under the Perspective of Internet Plus—Taking the Course of Numerical Control Machining and Programming as an Example
兰叶深, 徐文俊, 徐建亮, 刘文军 下载量: 559 浏览量: 1,243 科研立项经费支持
职业教育 Vol.9 No.2, April 15 2020, PDF, HTML, XML DOI:10.12677/VE.2020.92019 被引量
磨料射流与电火花复合加工技术喷嘴内流场速度分布研究Study on Velocity Distribution of Flow Field in Nozzles for the Composite Machining Technology of Abrasive Jet and EDM
白雪, 杨廷毅 下载量: 1,419 浏览量: 2,971 科研立项经费支持
流体动力学 Vol.5 No.4, December 29 2017, PDF, HTML, XML DOI:10.12677/IJFD.2017.54017 被引量