大塑性变形工业纯钛的研究现状Research Achievements of Sever Plastic Deformation on Commercially Pure Titanium
吕利强, 王艺超, 李 辉, 杨建朝 下载量: 2,730 浏览量: 10,886
冶金工程 Vol.2 No.2, June 29 2015, PDF, , XML DOI:10.12677/MEng.2015.22016 被引量
盾构隧道下穿河流对地表沉降影响和控制措施The Influence and Control Measures on the Surface Subsidence of the Shield Tunnel Running through the River
崔金汉 下载量: 504 浏览量: 2,408
土木工程 Vol.11 No.4, April 8 2022, PDF, HTML, XML DOI:10.12677/HJCE.2022.114052 被引量
轨道客车用不锈钢冷硬板表面振纹分析及控制Analysis and Control of Vibration Marks on the Surface of Chill Plate of Stainless Steel for Railway Vehicle
孟保功, 吴 腾 下载量: 586 浏览量: 856
冶金工程 Vol.9 No.2, June 13 2022, PDF, HTML, XML DOI:10.12677/MEng.2022.92014 被引量
基于AR模型的建筑物沉降变形分析预测Analysis and Prediction of Building Settlement Deformation Based on AR Model
张涛, 陈梦, 李晋东 下载量: 1,046 浏览量: 2,143
测绘科学技术 Vol.7 No.2, April 3 2019, PDF, HTML, XML DOI:10.12677/GST.2019.72013 被引量
超声探测器的曲面设计The Surface Design of an Ultrasonic Detector
陈为, 秦兴建 下载量: 1,744 浏览量: 3,884
设计 Vol.2 No.2, July 13 2017, PDF, HTML, XML DOI:10.12677/Design.2017.22002 被引量
衬底位置对氧化锌表面形貌的影响Effect of Substrate Position on Surface Morphology of ZnO
刘继瞳, 潘惊鸣, 王丽娜 下载量: 556 浏览量: 2,322 科研立项经费支持
材料科学 Vol.10 No.11, November 27 2020, PDF, HTML, XML DOI:10.12677/MS.2020.1011111 被引量
内应力与内变形间关系研究的新理论与新方法The New Theory and New Methods On The relationship between Stress and Deformation (预印本)
王昌益, 苏炜 下载量: 1,215 浏览量: 4,544
汉斯预印本 Vol.2 No.1, September 19 2017, PDF, , DOI:10.12677/HANSPrePrints.2017.21025 被引量
软岩隧洞大变形防控技术措施研究Prevention and Control Techniques of Inordinate Deformation of Tunnel in Soft Rock
马 骋 下载量: 425 浏览量: 1,210
土木工程 Vol.9 No.9, September 10 2020, PDF, HTML, XML DOI:10.12677/HJCE.2020.99093 被引量
航空发动机滑油系统全流量在线磨粒静电监测方法现状分析Status Analysis of the Method for the Aviation Engine Oil-Line Debris Electrostatic Monitoring
刘珍珍, 陈志雄, 关天阳, 胡文杰, 陈 进 下载量: 1,775 浏览量: 3,549 国家自然科学基金支持
国际航空航天科学 Vol.5 No.2, May 9 2017, PDF, HTML, XML DOI:10.12677/JAST.2017.52008 被引量
基于数值模拟的单晶硅切削加工表面质量研究Study on Surface Quality of Machined Single Crystal Silicon Based on Numerical Simulation of Cutting Process
张士军, 王海杰 下载量: 186 浏览量: 322
建模与仿真 Vol.13 No.2, March 26 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.132138 被引量