《塑性成形工艺与模具设计》课程实践教学研究Research on Curriculum Practice Teaching of Plastic Forming Process and Die Design
习小慧, 刘 强, 王金亮, 王 贵 下载量: 270 浏览量: 438 科研立项经费支持
教育进展 Vol.13 No.5, May 15 2023, PDF, HTML, XML DOI:10.12677/AE.2023.135375 被引量
退火方式对4Cr5MoSiV1钢组织演变与性能的影响Effect of Annealing Method on Microstructure Evolution and Properties of 4Cr5MoSiV1 Steel
赵 攀, 林国标, 刘献良, 赵伟朋 下载量: 1,484 浏览量: 2,434 国家科技经费支持
材料科学 Vol.8 No.4, April 26 2018, PDF, HTML, XML DOI:10.12677/MS.2018.84036 被引量
钢板电极处理亚甲基蓝模拟废水机理研究Mechanism of Methylene Blue from Simulated Wastewater by Steel Plate Electrode
曾 伟, 王营茹, 周海涛, 沈 瑶 下载量: 1,805 浏览量: 4,320 科研立项经费支持
水污染及处理 Vol.5 No.4, October 24 2017, PDF, HTML, XML DOI:10.12677/WPT.2017.54015 被引量
深冷处理时间对17CrNiMo6钢组织和性能的影响Effect of Cryogenic Treatment Time on Microstructure and Properties of 17CrNiMo6 Steel
刘 政, 赵鹏飞, 李亚微, 蒋显全 下载量: 1,216 浏览量: 1,958
材料科学 Vol.8 No.7, July 23 2018, PDF, HTML, XML DOI:10.12677/MS.2018.87098 被引量
钢丝缠绕剖分式扁挤压筒及其有限元分析Steel Wire Winding Split Flat Extrusion Cylinder and Its Finite Element Analysis
刘志卫, 吴 帆, 付文文 下载量: 195 浏览量: 337 科研立项经费支持
机械工程与技术 Vol.12 No.6, December 11 2023, PDF, HTML, XML DOI:10.12677/MET.2023.126053 被引量
45Cr9Si3气阀钢电渣锭、轧制及退火过程中碳化物析出行为Precipitation Behavior of Carbides in 45Cr9Si3 Valve Steel During ESR, Rolling and Annealing Process
刘东风, 郭 靖, 郭汉杰, 杨文晟, 段生朝 下载量: 613 浏览量: 1,722
材料科学 Vol.10 No.11, November 20 2020, PDF, HTML, XML DOI:10.12677/MS.2020.1011107 被引量
深冷处理顺序对EM35工具钢组织性能的影响Effect of the Sequence of Cryogenic Treatment on Microstructure and Performance of EM35 Tool Steel
张国立, 李伟秋, 彭继华, 廖靖雯, 肖 扬, 楚高洁 下载量: 451 浏览量: 667 科研立项经费支持
材料科学 Vol.11 No.10, October 26 2021, PDF, HTML, XML DOI:10.12677/MS.2021.1110127 被引量
康德的“智性直观”与牟宗三的“智的直觉”—认识论与存有论两种理论视域下的道德哲学Kant’s “die intellektuelle Anschauung” and Mou Zongsan’s “the Intellectual Intuition”—The Moral Philosophy in the Views of Epistemology and Ontology
胡 磊 下载量: 2,287 浏览量: 7,019 国家科技经费支持
哲学进展 Vol.5 No.2, April 12 2016, PDF, , XML DOI:10.12677/ACPP.2016.52004 被引量
材料成型及控制工程课程思政建设探索——以《锻造工艺与模具设计》课程为例Exploration on Ideological and Political Construction of Material Forming and Control Engineering Course—Taking Forging Technology and Die Design Course as an Example
龙 帅, 彭 鹏, 杨青山, 喻祖建, 戴庆伟 下载量: 407 浏览量: 2,564
创新教育研究 Vol.10 No.10, October 19 2022, PDF, HTML, XML DOI:10.12677/CES.2022.1010387 被引量
考虑配钢的混凝土徐变换算弹性模量Creep-Transformed Elastic Modulus of Concrete Considering Steel
陈 旭, 毛德均, 兰树伟 下载量: 421 浏览量: 3,303 国家自然科学基金支持
土木工程 Vol.12 No.7, July 18 2023, PDF, HTML, XML DOI:10.12677/HJCE.2023.127112 被引量