高锰奥氏体钢板表面脱皮与裂纹成因分析Analysis on the Causes of Surface Peeling and Cracking of High Manganese Austenitic Steel Plate
郑山发, 段才锋, 尚广浩, 张力萍 下载量: 231 浏览量: 331
冶金工程 Vol.10 No.4, December 26 2023, PDF, HTML, XML DOI:10.12677/MEng.2023.104011 被引量
基于脉冲卷积神经网络的带钢表面缺陷识别Surface Defect Recognition of Steel Strip Based on Pluse Convolutional Neural Network
吴 昊, 周洪成, 韦 静, 牛 犇, 姜陈雨 下载量: 241 浏览量: 361 科研立项经费支持
建模与仿真 Vol.12 No.6, November 13 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.126474 被引量
热终轧工艺对Al-4.8Mg合金组织性能的影响 The Influence of Microstructure and Properties of Al-4.8Mg Alloy after Hot Final Rolling Process
戴青松, 罗 任, 苏 新, 兰阳春, 曹柳絮 下载量: 236 浏览量: 362 科研立项经费支持
材料科学 Vol.13 No.7, July 25 2023, PDF, HTML, XML DOI:10.12677/MS.2023.137069 被引量
烟气余热直烘脱脂冷轧板可行性分析Feasibility Analysis of Direct Drying Degreasing Cold Rolled Sheet with Flue Gas Waste Heat
陶星伊, 张 瑞, 唐 恩, 罗晓琴, 刘敬褀, 林高翔, 鲁召强, 谢加军 下载量: 412 浏览量: 555
可持续能源 Vol.12 No.4, November 4 2022, PDF, HTML, XML DOI:10.12677/SE.2022.124004 被引量
新疆八钢锚杆钢产品工艺设计与开发The Design and Development of the Steel Products of the Eight Steel Rods in Xinjiang
张海军 下载量: 898 浏览量: 2,695
矿山工程 Vol.7 No.2, April 1 2019, PDF, HTML, XML DOI:10.12677/ME.2019.72019 被引量
低Al和高Al两种成分体系合金化热镀锌DP780性能对比 The Comparison of Properties between Low-Al and High-Al Annealed Hot-Dip Galvanizing DP780
杜小峰, 陈园林, 杨 芃, 杜 蓉 下载量: 353 浏览量: 618
材料科学 Vol.12 No.9, September 28 2022, PDF, HTML, XML DOI:10.12677/MS.2022.129103 被引量
250 mm厚耐热钢F5水冷模铸的生产实践Production Practice of 250 mm Thick Heat Resistant Steel F5 by Water-Cooled Die Casting
赵湖, 陈熙, 李海 下载量: 888 浏览量: 1,293
冶金工程 Vol.6 No.3, September 18 2019, PDF, HTML, XML DOI:10.12677/MEng.2019.63022 被引量
Al-Cu-Mg合金的预变形、位错密度与位错强化的定量研究The Quantitative Research of Deformation, Dislocation Density and Dislocation Strengthening in Al-Cu-Mg Alloy
雷郴祁, 张 劲, 邓运来, 陈明安 下载量: 3,340 浏览量: 7,409 国家自然科学基金支持
材料科学 Vol.5 No.3, May 27 2015, PDF, , XML DOI:10.12677/MS.2015.53018 被引量
加工工艺及热处理对钛合金板材织构影响的研究现状Research Situation on the Effect of Manufacturing Process and Heat Treatment on the Titanium Alloy Sheet Texture
刘松良, 卢影锋, 黄先明, 沙春鹏, 邢秋丽, 唐 进 下载量: 2,676 浏览量: 7,648
冶金工程 Vol.2 No.3, September 16 2015, PDF, , XML DOI:10.12677/MEng.2015.23021 被引量
双相不锈钢组织及腐蚀性能研究The Study on Microstructure and Corrosion Resistance Properties of Duplex Stainless Steel
陈 巍, 高永亮, 任波维, 袁书强, 杨 阳, 励 康, 宗 铎, 应寒冰 下载量: 982 浏览量: 1,964
材料科学 Vol.9 No.6, June 28 2019, PDF, HTML, XML DOI:10.12677/MS.2019.9696079 被引量