基于Gazebo的复合式无人机设计与仿真Design and Simulation of Compound UAV Based on Gazebo
成泳陶, 王 鑫, 王立峰 下载量: 564 浏览量: 1,227
建模与仿真 Vol.10 No.2, May 13 2021, PDF, HTML, XML DOI:10.12677/MOS.2021.102039 被引量
火力发电厂相变换热器不稳定性实验研究Experimental Research on Instability of Phase-Change Heater in Thermal Power Plant
何 毅, 汪家琼 下载量: 598 浏览量: 3,632
机械工程与技术 Vol.10 No.4, August 10 2021, PDF, HTML, XML DOI:10.12677/MET.2021.104048 被引量
含扰动切换系统在异步切换下的镇定Stabilization of Switched Systems with Perturbations under Asynchronous Switching
向伟铭, 肖建, 肖承勇 下载量: 3,376 浏览量: 10,432 国家自然科学基金支持
智能电网 Vol.1 No.1, June 16 2011, PDF, , DOI:10.12677/sg.2011.11003 被引量
基于扇形区域极点配置状态反馈H∞控制State Feedback H∞ Control Based on Sector Region Pole Assignment
谷美萱, 姚 波, 王福忠 下载量: 1,065 浏览量: 2,182
动力系统与控制 Vol.8 No.2, February 22 2019, PDF, HTML, XML DOI:10.12677/DSC.2019.82006 被引量
基于空压机的永磁同步电机矢量控制研究Research the Permanent Magnet Synchronous Motor Vector Control Based on the Air Compressor
曾燕平, 李红鸣, 詹雷军, 梅光磊, 李 杰, 虞洪文, 陈 超 下载量: 368 浏览量: 626
动力系统与控制 Vol.11 No.3, July 21 2022, PDF, HTML, XML DOI:10.12677/DSC.2022.113015 被引量
燃料电池车用多相DC-DC变换器研究Multi-Phase DC-DC Converter with Bi-Directional Power Flow Ability for FCEV
原增泉, 陈 曦, 许海平, 许志强 下载量: 1,117 浏览量: 1,877 科研立项经费支持
电气工程 Vol.7 No.1, March 25 2019, PDF, HTML, XML DOI:10.12677/JEE.2019.71007 被引量
一体化反应堆自然循环流动传热特性分析Analysis of Natural Circulation Flow and Heat Transfer Characteristics in an Integrated Reactor
吴建邦, 张星亮, 白宇飞 下载量: 394 浏览量: 779
核科学与技术 Vol.11 No.1, January 12 2023, PDF, HTML, XML DOI:10.12677/NST.2023.111004 被引量
电沉积制备Fe3O4涂层的工艺研究Study on Preparation Process of Fe3O4 Coating Prepared by Electrodeposition
郑明珉, 刘艳红, 张安磊, 王 鹰, 张迎春, 王晓婧 下载量: 574 浏览量: 1,001 科研立项经费支持
材料科学 Vol.10 No.11, November 27 2020, PDF, HTML, XML DOI:10.12677/MS.2020.1011112 被引量
基于STM32的单相逆变器并网系统设计与实现Design and Implementation of Single-Phase Inverter Grid-Connected System Based on STM32
徐贵鑫, 金 海 下载量: 753 浏览量: 3,384
软件工程与应用 Vol.10 No.2, April 15 2021, PDF, HTML, XML DOI:10.12677/SEA.2021.102016 被引量
五轴数控机床进给系统动态误差影响因素分析Analysis of the Factors Affecting the Dynamic Error of the Feed System of Five Axis NC Machine Tools
郭玉玺, 陈光胜 下载量: 326 浏览量: 564
建模与仿真 Vol.12 No.1, January 19 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.121019 被引量