滚筒式振动搅拌机激振器支撑方案设计及有限元分析Drum Vibratory Mixer Exciter Support Scheme Design and Finite Element Analysis
赵 悟, 李文涛, 田 军, 王树林 下载量: 361 浏览量: 559 科研立项经费支持
机械工程与技术 Vol.12 No.3, June 15 2023, PDF, HTML, XML DOI:10.12677/MET.2023.123031 被引量
钢框架内填正交胶合木剪力墙结构的性能分析Analysis of Performance of Steel Frame Filled with Cross-Laminated Timber Shear Walls
贾宏宇, 赵艳阳 下载量: 32 浏览量: 50
土木工程 Vol.13 No.6, June 27 2024, PDF, , XML DOI:10.12677/hjce.2024.136107 被引量
乙肝肝硬化门脉高压进展的危险因素分析及列线图预测模型构建Analysis of Risk Factors for the Progression of Portal Hypertension in Hepatitis B Cirrhosis and Construction of a Nomogram Prediction Model
葛安宁, 卢 燕, 李金金, 李雪芳, 王亮亮, 苟 卫 下载量: 195 浏览量: 298 科研立项经费支持
临床医学进展 Vol.14 No.1, January 30 2024, PDF, HTML, XML DOI:10.12677/ACM.2024.141242 被引量
四足机器人结构柔顺化设计与性能评价Design and Evaluation of the Compliant Structure for a Quadruped Robot
李冬冬, 张秀丽, 周坤玲, 龚加庆 下载量: 4,544 浏览量: 18,257 国家自然科学基金支持
人工智能与机器人研究 Vol.2 No.1, February 7 2013, PDF, , DOI:10.12677/AIRR.2013.21001 被引量
BFRP复合材料加固老旧砌体砖墙的平面内受力性能In-Plane Mechanical Behavior of Ancient Masonry Walls Strengthened by BFRP Composite Material
雷 真, 张 力, 段自侠, 白柳 下载量: 1,636 浏览量: 3,130 科研立项经费支持
材料科学 Vol.7 No.6, September 13 2017, PDF, , XML DOI:10.12677/MS.2017.76078 被引量
珠三角深厚软土层公路隧道深基坑围护结构变形分析Supporting Parameter Sensitivity Analysis on Deep Foundation Pit of Highway Tunnel in the Pearl River Delta
庞文喻, 王 晨, 吴春勇 下载量: 1,458 浏览量: 3,592
土木工程 Vol.7 No.3, May 15 2018, PDF, HTML, XML DOI:10.12677/HJCE.2018.73041 被引量
轮胎断面的约束方式对有限元分析的影响Influence of Tire Profile Constraints on Finite Element Analysis
张铃欣, 朱大钎, 李永华 下载量: 1,294 浏览量: 3,350
建模与仿真 Vol.7 No.3, August 6 2018, PDF, HTML, XML DOI:10.12677/MOS.2018.73014 被引量
堆载对邻近高铁桩基变形影响的数值分析研究Numerical Analysis of the Influence of Surcharge Loads on the Adjacent High-Speed Railway Pile Deformation
马 重, 傅承城, 黄 昕 下载量: 798 浏览量: 2,766
土木工程 Vol.9 No.2, February 28 2020, PDF, HTML, XML DOI:10.12677/HJCE.2020.92018 被引量
双盘转子碰摩故障动力学特性分析Analysis of Dynamic Characteristics of Rub-Impact Fault of Double-Disk Rotor
张 扬, 南国防, 朱玉洁 下载量: 440 浏览量: 655
建模与仿真 Vol.11 No.3, May 19 2022, PDF, HTML, XML DOI:10.12677/MOS.2022.113066 被引量
基于Hyperworks的减速器箱体有限元分析Finite Element Analysis of Reducer Box Based on Hyperworks
都 康 下载量: 336 浏览量: 645
建模与仿真 Vol.12 No.1, January 11 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.121009 被引量