机床主轴机构模态和振动特性分析与主轴径向回转误测试方法的研究Study on Analysis of Modal and Vibration Characteristics and Test Method of Radial Rotation Error of Machine Tool Spindle
李希铭 下载量: 303 浏览量: 502
建模与仿真 Vol.12 No.4, July 24 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.124362 被引量
小型便携清雪机主轴设计Design of the Spindle of a Small Portable Snow Cleaning Machine
姜祎博, 朱楚轩, 冯新敏, 张 亮 下载量: 1,146 浏览量: 3,635
机械工程与技术 Vol.7 No.4, August 13 2018, PDF, HTML, XML DOI:10.12677/MET.2018.74031 被引量
基于ANSYS的永磁同步电机模态分析与振动特性分析Modal Analysis and Vibration Characteristics of Permanent Magnet Synchronous Motor Based on ANSYS
蒋凌霄, 王 艳 下载量: 86 浏览量: 179
建模与仿真 Vol.13 No.3, May 23 2024, PDF, HTML, XML DOI:10.12677/mos.2024.133229 被引量
液体静压电主轴轴心轨迹影响因素研究Study on the Evolution Law of Spindle Trajectories of Hydrostatic Motorized Spindle under Cutting Load
胡斌梁, 熊友平, 康辉民, 陈 鹏, 彭灿兮 下载量: 963 浏览量: 1,904 国家自然科学基金支持
机械工程与技术 Vol.7 No.6, December 26 2018, PDF, HTML, XML DOI:10.12677/MET.2018.76060 被引量
柱塞泵出口管线振动模态仿真分析Vibration Modal Simulation Analysis of Outlet Pipeline of Piston Pump
王禄友, 朱 林, 李骏瑜, 赵婷婷, 孙 炜 下载量: 237 浏览量: 382
机械工程与技术 Vol.12 No.2, April 29 2023, PDF, HTML, XML DOI:10.12677/MET.2023.122021 被引量
不考虑内流影响的悬跨管道涡激振动模态分析Vortex-Induced Vibration Modal Analysis of Free Spanning Pipelines without Considering the Effect of Internal Flow
徐学波, 刘晓亮 下载量: 541 浏览量: 1,003
仪器与设备 Vol.9 No.3, August 31 2021, PDF, HTML, XML DOI:10.12677/IaE.2021.93012 被引量
振动筛引发的楼层振动分析与减振处理Floor Vibration Analysis and Vibration Reduction Treatment Caused by Vibrating Screen
赵宗琦, 段 权, 项靖海, 谢燕媚 下载量: 822 浏览量: 1,958
机械工程与技术 Vol.8 No.6, December 30 2019, PDF, HTML, XML DOI:10.12677/MET.2019.86058 被引量
燃烧室结构的热-声-振耦合特性模拟分析研究Simulation Analysis of the Thermo-Acoustic-Vibration Coupling of Combustion Chamber Structures
郑 敏, 申 凡, 徐一鸣, 刘 涛 下载量: 2,213 浏览量: 5,490 国家自然科学基金支持
声学与振动 Vol.5 No.2, June 19 2017, PDF, HTML, XML DOI:10.12677/OJAV.2017.52006 被引量
基于ANSYS的航空发动机外部管路振动仿真分析Vibration Simulation Analysis on Aeroengine External Pipelines Based on ANSYS
滕云楠, 马振通 下载量: 494 浏览量: 1,074 科研立项经费支持
声学与振动 Vol.10 No.1, March 29 2022, PDF, HTML, XML DOI:10.12677/OJAV.2022.101001 被引量
基于Hyperworks对车后背门的刚度和模态分析Stiffness and Modal Analysis of the Rear Door of a Vehicle Based on Hyperworks
伏 天 下载量: 87 浏览量: 141
建模与仿真 Vol.13 No.3, May 30 2024, PDF, HTML, XML DOI:10.12677/mos.2024.133282 被引量