数控技术课程中超硬材料切削加工所涉及的关键问题的引入Introduction of Key Problems in Super Hard Material Cutting in NC Technology Course
董新峰, 仇中柱, 韩清鹏 下载量: 836 浏览量: 3,028
教育进展 Vol.9 No.3, May 29 2019, PDF, HTML, XML DOI:10.12677/AE.2019.93063 被引量
三次三角插值样条曲线的数控插补计算方法An NC Interpolation Calculation Method of Cubic Trigonometric Cardinal Interpolation Spline
张益汉, 宋爱平, 刘祖奇, 邱 林 下载量: 2,623 浏览量: 7,777
机械工程与技术 Vol.4 No.2, June 25 2015, PDF, , XML DOI:10.12677/MET.2015.42016 被引量
数控加工中3D表面形貌数字图像处理技术3D Surface Topography Analysis Using Image Processing Technology in NC
陈慧群 下载量: 3,258 浏览量: 10,183 科研立项经费支持
机械工程与技术 Vol.2 No.4, December 30 2013, PDF, , DOI:10.12677/MET.2013.24028 被引量
基于企业需求高校数控实训教学改革实践研究Research on the Practice of NC Training Teaching Reform in Colleges and Universities Based on Enterprise Needs
卢 干, 廖玉松 下载量: 978 浏览量: 2,200 科研立项经费支持
教育进展 Vol.8 No.5, September 10 2018, PDF, HTML, XML DOI:10.12677/AE.2018.85083 被引量
悬索桥索鞍索槽曲面数控加工技术研究与探讨Research and Discussion on NC Machining Technology of Saddle Cable Groove Surface of Suspension Bridge Cable
董小亮, 唐长平, 刘令娴 下载量: 408 浏览量: 844
机械工程与技术 Vol.10 No.5, October 28 2021, PDF, HTML, XML DOI:10.12677/MET.2021.105062 被引量
三全育人背景下的《数控机床电气控制与PLC》课程思政元素探索Exploration on Ideological and Political Elements of the Course “NC Machine Tool Electrical Control and PLC” under the Background of Three-Wide Education
饶楚楚, 兰叶深, 叶云霞 下载量: 648 浏览量: 898 科研立项经费支持
职业教育 Vol.12 No.3, May 15 2023, PDF, HTML, XML DOI:10.12677/VE.2023.123046 被引量
五轴数控机床进给系统动态误差影响因素分析Analysis of the Factors Affecting the Dynamic Error of the Feed System of Five Axis NC Machine Tools
郭玉玺, 陈光胜 下载量: 321 浏览量: 550
建模与仿真 Vol.12 No.1, January 19 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.121019 被引量
基于模糊控制理论的数控加工参数的自适应控制研究Adaptive Control of CNC Machining Parameters Based on Fuzzy Control Theory
刘恒丽 下载量: 691 浏览量: 1,342
动力系统与控制 Vol.10 No.2, March 31 2021, PDF, HTML, XML DOI:10.12677/DSC.2021.102011 被引量
“互联网+”视域下高职智慧课堂教学模式的研究与应用——以《数控加工与编程》课程为例Research and Application of the Intelligent Classroom Teaching Mode in Higher Vocational Education under the Perspective of Internet Plus—Taking the Course of Numerical Control Machining and Programming as an Example
兰叶深, 徐文俊, 徐建亮, 刘文军 下载量: 590 浏览量: 1,307 科研立项经费支持
职业教育 Vol.9 No.2, April 15 2020, PDF, HTML, XML DOI:10.12677/VE.2020.92019 被引量
航天产品的制品再利用管理方法初探Research on the Management Methods for Product Reuse of Aerospace Products
曹 娜, 傅东旭, 马 静, 王宏言, 黄洪垒, 隗功正 下载量: 367 浏览量: 751
管理科学与工程 Vol.10 No.1, March 29 2021, PDF, HTML, XML DOI:10.12677/MSE.2021.101010 被引量