铣削过程稳定性时域分析方法研究进展Research Progress of Chatter Stability Analysis for Milling Process in Time-Domain
李忠群, 刘鸿志, 刘 学, 段林升, 刘 浪 下载量: 606 浏览量: 1,197 科研立项经费支持
机械工程与技术 Vol.9 No.6, December 24 2020, PDF, HTML, XML DOI:10.12677/MET.2020.96066 被引量
内螺纹铣削加工精度的试验研究Vibration Experiment and Analysis of Large Diameter Internal Thread in Milling
卜庆旭, 金成哲, 逄 迪 下载量: 561 浏览量: 1,652
机械工程与技术 Vol.9 No.3, June 18 2020, PDF, HTML, XML DOI:10.12677/MET.2020.93028 被引量
GH4169合金的铣削过程及刀具磨损下的热力耦合研究Milling Process of GH4169 Alloy and Thermodynamic Coupling Study under Tool Wear
段士伟, 李 萍, 康敬波, 史广源, 崔敏超 下载量: 372 浏览量: 590
建模与仿真 Vol.12 No.1, January 19 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.121023 被引量
基于PCD刀具的TA15钛合金精密铣削工艺优化及刀具磨损研究Process Optimization and Tools Wear of Precision Milling of TA15 Titanium Alloy Based on PCD Tools
罗育银, 段周波 下载量: 591 浏览量: 819
机械工程与技术 Vol.12 No.5, October 23 2023, PDF, HTML, XML DOI:10.12677/MET.2023.125051 被引量
高强度42CrMo钢立铣切削力实验与建模Study on Prediction and Model of Milling Force of 42CrMo Steel
唐德文, 张文明, 赵瑞兰, 彭聪 下载量: 2,056 浏览量: 4,274 科研立项经费支持
仪器与设备 Vol.4 No.3, September 29 2016, PDF, , XML DOI:10.12677/IaE.2016.43009 被引量
采用改进人工蜂群算法的低碳铣削参数优化Optimization of Low Carbon Milling Parameters Using Improved Artificial Bee Colony Algorithm
聂俊争, 李仁旺 下载量: 341 浏览量: 621 国家自然科学基金支持
建模与仿真 Vol.12 No.2, March 29 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.122143 被引量
基于WPD与功率谱熵的铣削颤振仿真识别Simulation Identification of Milling Chatter Based on WPD and Power Spectrum Entropy
顾于青, 邱彬彬, 李卫东 下载量: 227 浏览量: 385
建模与仿真 Vol.13 No.1, January 19 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.131048 被引量
基于多目标灰狼算法的H13模具钢铣削工艺优化研究Research on Optimization of H13 Die Steel Milling Process Based on Multi-Objective Grey Wolf Algorithm
卢相林, 江小辉, 汪 龙, 郭淼现, 罗 超, 林志俭 下载量: 353 浏览量: 491 国家自然科学基金支持
运筹与模糊学 Vol.13 No.2, April 24 2023, PDF, HTML, XML DOI:10.12677/ORF.2023.132111 被引量
基于力信号的铝基碳化硅精密铣削参数试验研究Experimental Study on Precision Milling Pa-rameters of Aluminum-Based Silicon Carbide Based on Force Signal
叶宇超, 刘嘉昊 下载量: 463 浏览量: 647
建模与仿真 Vol.12 No.2, March 16 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.122103 被引量
高能球磨法制备0.7CaTiO3-0.3NdAlO3介质陶瓷及其微波器件的性能研究Investigation on the Properties of 0.7CaTiO3-0.3NdAlO3 Dielectric Ceramics and Its Microwave Devices by High-Energy Ball Milling Process
房丽敏, 谢丽英, 赵可沦 下载量: 1,217 浏览量: 1,890 科研立项经费支持
材料科学 Vol.8 No.7, July 6 2018, PDF, HTML, XML DOI:10.12677/MS.2018.87094 被引量