中置电动助力自行车减速器的振动特性研究Research on the Vibration Characteristics of the Speed Reducer of Mid-Mounted Electric-Assisted Bicycle
崔建昆, 胡汉林 下载量: 408 浏览量: 558
建模与仿真 Vol.11 No.3, May 9 2022, PDF, HTML, XML DOI:10.12677/MOS.2022.113048 被引量
基于Pro/E的直齿轮的参数化建模Parameterized Modeling of Spur Gears Based on Pro/E
赵洪波, 腾 睿, 冯认金 下载量: 1,872 浏览量: 4,516
动力系统与控制 Vol.6 No.1, December 19 2016, PDF, HTML, XML DOI:10.12677/DSC.2017.61001 被引量
基于齿向修形的抛物线锥齿轮仿真分析Simulation and Analysis of Parabolic Bevel Gears Based on Axial Modification
付诗翔, 张 波, 张 瑜 下载量: 199 浏览量: 294 国家自然科学基金支持
建模与仿真 Vol.13 No.1, January 19 2024, PDF, HTML, XML DOI:10.12677/MOS.2024.131045 被引量
渐开线弧齿圆柱齿轮副抗偏载特性的研究Anti-Bias Load Capacity Analysis of the Involute Arc Cylindrical Gear
刘祖奇, 宋爱平, 张益汉, 罗 超 下载量: 2,406 浏览量: 7,098
机械工程与技术 Vol.4 No.3, September 23 2015, PDF, , XML DOI:10.12677/MET.2015.43023 被引量
基于ROMAX的斜齿轮优化设计Optimized Design of Helical Gears Based on ROMAX
杨建逾 下载量: 78 浏览量: 128
建模与仿真 Vol.13 No.3, May 31 2024, PDF, HTML, XML DOI:10.12677/mos.2024.133297 被引量
正交面齿轮齿面铣削加工与测量分析研究Study of Orthogonal Gear Tooth Milling and Measurement Analysis
李同杰, 靳广虎, 苏 阔, 李晓贞 下载量: 480 浏览量: 645 科研立项经费支持
机械工程与技术 Vol.12 No.3, June 5 2023, PDF, HTML, XML DOI:10.12677/MET.2023.123025 被引量
直齿圆锥齿轮与弧齿圆锥齿轮轮齿应力比较The Comparison of Straight Tooth Bevel Gear and Spiral Bevel Gear about the Stress of Gear Tooth
张钦搏, 宋爱平, 罗超, 张海滨, 王树凤 下载量: 1,867 浏览量: 4,563
仪器与设备 Vol.4 No.2, July 28 2016, PDF, , XML DOI:10.12677/IaE.2016.42002 被引量
牙囊在牙齿萌出中的作用及其机制研究进展Progress on the Effect of Dental Follicle on Tooth Eruption and Its Mechanism
霍艺洁, 陈学鹏, 胡济安 下载量: 548 浏览量: 1,071 国家社会科学基金支持
临床医学进展 Vol.10 No.12, December 28 2020, PDF, HTML, XML DOI:10.12677/ACM.2020.1012477 被引量
渐开线绘图仪设计Design of Involute Drawing Plotter
刘邢宇, 张学斌 下载量: 1,052 浏览量: 1,471
机械工程与技术 Vol.8 No.3, June 10 2019, PDF, HTML, XML DOI:10.12677/MET.2019.83029 被引量
新型摆线齿形谐波齿轮传动设计与分析A New Type of Cycloidal Tooth Profile Design and Analysis of Harmonic Gear Drive
侍威, 郑继贵, 牛涛, 宋洪舟 下载量: 2,305 浏览量: 3,701
机械工程与技术 Vol.7 No.1, February 28 2018, PDF, HTML, XML DOI:10.12677/MET.2018.71006 被引量