碳纤维复合材料成型工艺的研究进展Research Progress on the Molding Process of Carbon Fiber Composite Materials
孙 琳, 苏顺生, 张仁航, 林 鹏, 张 勇 下载量: 453 浏览量: 1,133 科研立项经费支持
材料科学 Vol.12 No.8, August 26 2022, PDF, HTML, XML DOI:10.12677/MS.2022.128092 被引量
汽车内饰件注塑成型工艺的分析与优化Analysis and Optimization of Injection Molding Process for Automotive Interior Parts
吴天宸, 翟建广, 邹明辉 下载量: 308 浏览量: 604
建模与仿真 Vol.12 No.3, May 8 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123165 被引量
基于Moldflow的端套成型优化分析Moldflow-Based Molding Optimization Analysis on Pot Head
王 凯, 王传洋 下载量: 2,897 浏览量: 5,879
机械工程与技术 Vol.3 No.4, December 16 2014, PDF, , DOI:10.12677/MET.2014.34026 被引量
快速冷热循环注塑工艺对ABS塑件表面光泽度的影响 The Effect of Rapid Cold and Hot Cycle Injection Molding Process on the Surface Glossiness of ABS Plastic Parts
熊 建 下载量: 236 浏览量: 408
材料科学 Vol.13 No.11, November 29 2023, PDF, HTML, XML DOI:10.12677/MS.2023.1311109 被引量
Moldflow在导轨式电源外壳注塑模具设计中的应用Application of Moldflow in Molding Design for DIN-Rail Power Supply Housing
陶正岗 下载量: 2,072 浏览量: 6,633
机械工程与技术 Vol.6 No.2, June 22 2017, PDF, HTML, XML DOI:10.12677/MET.2017.62023 被引量
响应面分析法优化秸秆墙板压缩成型工艺参数The Response Surface Analysis Method Optimizes the Process Parameters of Straw Wall Panel Compression Molding
于 航, 钟栋青, 朱宇轩, 高 宇, 王路明 下载量: 308 浏览量: 478
建模与仿真 Vol.12 No.1, January 31 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.121050 被引量
基于响应面法的塑料微压容器吹塑成型壁厚优化Optimization of Wall Thickness for Blow Molding of Plastic Micro Pressure Containers Based on Response Surface
张保山, 刘淑梅, 曹 熹 下载量: 241 浏览量: 394
建模与仿真 Vol.12 No.5, August 30 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.125390 被引量
聚合物熔体充模流动中的对换热行为研究The Study of Convective Heat Transfer Behavior of Polymer Melt in Micro Injection Molding
张拯恺, 于同敏, 段春争, 邹德健 下载量: 1,486 浏览量: 2,399 国家自然科学基金支持
应用物理 Vol.8 No.5, May 22 2018, PDF, HTML, XML DOI:10.12677/APP.2018.85025 被引量
氧化锆陶瓷的熔融沉积成型研究Research on Fused Deposition Molding of Zirconia Ceramics
贺庆龙, 张 力, 郭金玉, 徐协文, 周 哲, 刘 鹏, 杨现锋 下载量: 740 浏览量: 2,669 国家自然科学基金支持
材料科学 Vol.10 No.4, April 29 2020, PDF, HTML, XML DOI:10.12677/MS.2020.104035 被引量
内框纸成型组件对“前圆后方”细支卷烟内框纸折角质量的影响性研究Inside the Frame Paper Molding Component on the “Front Circle and Rear” Thin Cigarette Influence of Quality of Frame Paper
龚曼月, 周自荣, 赵鹏霄, 杨 宏, 李 建 下载量: 295 浏览量: 443
仪器与设备 Vol.10 No.2, June 30 2022, PDF, , DOI:10.12677/IaE.2022.102018 被引量