基于K-Means聚类分析的汽车行驶工况构建Construction of Vehicle Driving Cycle Based on K-Means Cluster Analysis
苏晓雯, 董平军 下载量: 435 浏览量: 860
建模与仿真 Vol.11 No.3, May 30 2022, PDF, HTML, XML DOI:10.12677/MOS.2022.113078 被引量
在实际行驶工况下两级吸收/压缩混合制冷循环——实用价值分析Double-Stage System of Absorption-Compression Hybrid Refrigeration Cycle in Real Driving Conditions ——Analysis of Practical Value
隋 意, 徐士鸣, 周月辉 下载量: 2,935 浏览量: 7,451
机械工程与技术 Vol.2 No.1, March 29 2013, PDF, , DOI:10.12677/MET.2013.21003 被引量
汽油车典型工况下车内噪声特征分析研究A Study on the Noise Characteristics of a Gasoline Vehicle under Typical Operating Conditions
李旭伟, 刘 程, 杨东绩, 牛治慧 下载量: 599 浏览量: 1,264
声学与振动 Vol.9 No.1, March 2 2021, PDF, HTML, XML DOI:10.12677/OJAV.2021.91001 被引量
乘用车车内振动噪声测试方法研究Research on Measurement Method of Vibration and Noise in Passenger Car
李旭伟, 杨清淞, 杨东绩, 黄 骥 下载量: 563 浏览量: 1,140
应用物理 Vol.11 No.4, April 21 2021, PDF, HTML, XML DOI:10.12677/APP.2021.114024 被引量
增程式客车动力系统参数计算及仿真分析Calculation and Simulation Analysis of Power System Parameters of Range-Extended Buses
马钘骢, 李惠林, 何 锋, 边东生 下载量: 251 浏览量: 1,697 科研立项经费支持
建模与仿真 Vol.12 No.6, November 16 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.126484 被引量
基于改进的K-均值聚类算法构建柴油车运行工况Construction of Diesel Vehicle Driving Condition Based on Improved K-Means Clustering Algorithm
李勇志 下载量: 290 浏览量: 395
建模与仿真 Vol.12 No.3, May 29 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123249 被引量
先进后处理对重型车超细颗粒排放的影响 Effect of Advanced Aftertreatment for PM and NOx Reduction on Heavy-Duty Vehicle Engine Ultrafine Particle Emissions under Different Working Conditions
于晓洋, 鞠伟达, 鲁永亮 下载量: 278 浏览量: 475
材料科学 Vol.13 No.3, March 21 2023, PDF, HTML, XML DOI:10.12677/MS.2023.133021 被引量
基于PMP算法的燃料电池混合动力车辆实时能量管理策略A Real Time Management Strategy for Fuel Cell Hybrid Vehicles Based on Pontryagin’s Minimum Principle
姚赵祎, 武志斐, 郝慧敏, 裴佳豪, 霍肖伟 下载量: 426 浏览量: 884 科研立项经费支持
仪器与设备 Vol.11 No.3, August 25 2023, PDF, HTML, XML DOI:10.12677/IaE.2023.113026 被引量
电动汽车热泵空调系统匹配设计方法的提出与验证Proposal and Verification of Matching Design Method for Electric Vehicle Heat Pump Air-Conditioning System
胡莎莎, 苏 林, 韩南奎, 李 康, 方奕栋 下载量: 650 浏览量: 1,383
建模与仿真 Vol.9 No.2, May 8 2020, PDF, HTML, XML DOI:10.12677/MOS.2020.92016 被引量
基于刚弹耦合模型的薄壳车体危险点疲劳计算Fatigue Assessment of Risk Point on Thin-Shelled Hull Based on the Rigid-Flex Coupled Model
徐曦萌, 王红岩, 赵巍, 粟斌, 徐万里 下载量: 2,907 浏览量: 8,394
机械工程与技术 Vol.2 No.1, March 29 2013, PDF, , DOI:10.12677/MET.2013.21005 被引量