卡盘式带轮无级变速器设计Design of Chuck Type CVT
杜甫, 储月刚, 彭云, 宋爱平 下载量: 1,546 浏览量: 3,371
机械工程与技术 Vol.6 No.4, October 24 2017, PDF, HTML, XML DOI:10.12677/MET.2017.64036 被引量
渐开线弧齿圆柱齿轮副抗偏载特性的研究Anti-Bias Load Capacity Analysis of the Involute Arc Cylindrical Gear
刘祖奇, 宋爱平, 张益汉, 罗 超 下载量: 2,406 浏览量: 7,098
机械工程与技术 Vol.4 No.3, September 23 2015, PDF, , XML DOI:10.12677/MET.2015.43023 被引量
三次三角插值样条曲线的数控插补计算方法An NC Interpolation Calculation Method of Cubic Trigonometric Cardinal Interpolation Spline
张益汉, 宋爱平, 刘祖奇, 邱 林 下载量: 2,629 浏览量: 7,799
机械工程与技术 Vol.4 No.2, June 25 2015, PDF, , XML DOI:10.12677/MET.2015.42016 被引量
利用预应力原理提升龙门机床横梁的抗弯强度Promoting the Bending Strength of the Beam of Gantry Machine Tool by the Principle of Prestress
罗 超, 宋爱平, 张钦搏, 王树凤, 张海滨 下载量: 2,074 浏览量: 3,502 科研立项经费支持
机械工程与技术 Vol.5 No.2, June 30 2016, PDF, , XML DOI:10.12677/MET.2016.52017 被引量
直齿圆锥齿轮与弧齿圆锥齿轮轮齿应力比较The Comparison of Straight Tooth Bevel Gear and Spiral Bevel Gear about the Stress of Gear Tooth
张钦搏, 宋爱平, 罗超, 张海滨, 王树凤 下载量: 1,867 浏览量: 4,564
仪器与设备 Vol.4 No.2, July 28 2016, PDF, , XML DOI:10.12677/IaE.2016.42002 被引量
学科交叉融合的地理学研究生创新能力评价指标体系的构建路径探讨Discussion on the Construction of the Evaluation Index System of the Innovation Ability of Geography Postgraduates with Interdisciplinary Integration
杨 旭, 冯钰时, 烟贯发, 武晓威, 王 芳, 陈 宇 下载量: 265 浏览量: 426 科研立项经费支持
职业教育 Vol.12 No.1, January 9 2023, PDF, HTML, XML DOI:10.12677/VE.2023.121003 被引量
基于ANSYS的直齿轮啮合有限元分析Finite Element Analysis of Spur Gear Meshing Based on ANSYS
刘文君, 徐旭松, 耿浩然, 薛耀阳, 马家亮 下载量: 176 浏览量: 384
机械工程与技术 Vol.13 No.2, April 10 2024, PDF, HTML, XML DOI:10.12677/met.2024.132012 被引量