[1]
|
黄健, 姜山. 3D打印技术将掀起“第三次工业革命”? [J]. 新材料产业, 2013(1): 62-67.
|
[2]
|
Zhang, L., Dong, H., Yu, Y., et al. (2022) Application and Challenges of 3D Food Printing Technology in Manned Spaceflight: A Review. International Journal of Food Science & Technology, 57, 4906-4917.
https://doi.org/10.1111/ijfs.15879
|
[3]
|
Zhong, C., Liu, J., Backes, G., et al. (2021) 3D Printing of Large-Scale Components of Titanium Alloys under Open Atmosphere. Materials Today Communications, 28, Article ID: 102688.
https://doi.org/10.1016/j.mtcomm.2021.102688
|
[4]
|
Matt, S., Raj, M.M. and Il, Y.K. (2020) Additive Manufacturing Infill Optimization for Automotive 3D-Printed ABS Components. Rapid Prototyping Journal, 26, 89-99. https://doi.org/10.1108/RPJ-01-2019-0007
|
[5]
|
Shetty, S., Nandish, B.T., Amin, V., et al. (2022) 3D Printed Polyether Ether Ketone (PEEK), Polyamide (PA) and Its Evaluation of Mechanical Properties and Its Uses in Healthcare Applications. IOP Conference Series: Materials Science and Engineering, 1224, Article ID: 012005. https://doi.org/10.1088/1757-899X/1224/1/012005
|
[6]
|
Krechmer, J.E., Phillips, B., Chaloux, N., et al. (2021) Chemical Emissions from Cured and Uncured 3D-Printed Ventilator Patient Circuit Medical Parts. ACS Omega, 6, 30726-30733. https://doi.org/10.1021/acsomega.1c04695
|
[7]
|
He, Y., Luckett, J., Begines, B., et al. (2022) Ink-Jet 3D Printing as a Strategy for Developing Bespoke Non-Eluting Biofilm Resistant Medical Devices. Biomaterials, 281, Article ID: 121350.
https://doi.org/10.1016/j.biomaterials.2021.121350
|
[8]
|
Ataide, V.N., Rocha, D.P., de Siervo, A., et al. (2021) Additively Manufactured Carbon/Black-Integrated Polylactic Acid 3D Printed Sensor for Simultaneous Quantification of Uric Acid and Zinc in Sweat. Microchimica Acta, 188, 388. https://doi.org/10.1007/s00604-021-05007-5
|
[9]
|
Stopforth, R. (2021) Conductive Polylactic Acid Filaments for 3D Printed Sensors: Experimental Electrical and Thermal Characterization. Scientific African, 14, e1040. https://doi.org/10.1016/j.sciaf.2021.e01040
|
[10]
|
Kalinke, C., de Oliveira, P.R., Neumsteir, N.V., et al. (2022) Influence of Filament Aging and Conductive Additive in 3D Printed Sensors. Analytica Chimica Acta, 1191, Article ID: 339228. https://doi.org/10.1016/j.aca.2021.339228
|
[11]
|
Kouchakzadeh, S. and Narooei, K. (2021) Simulation of Piezoresistance and Deformation Behavior of a Flexible 3D Printed Sensor Considering the Nonlinear Mechanical Behavior of Materials. Sensors and Actuators: A Physical, 332, Article ID: 113214. https://doi.org/10.1016/j.sna.2021.113214
|
[12]
|
Tian, X. and Xu, B. (2021) 3D Printing for Solid-State Energy Storage. Small Methods, 5, e2100877.
https://doi.org/10.1002/smtd.202100877
|
[13]
|
Hairul, H.H., Saiful, A.S., Aya, A., et al. (2018) 3D Printable Conductive Materials for the Fabrication of Electrochemical Sensors: A Mini Review. Electrochemistry Communications, 96, 27-31.
https://doi.org/10.1016/j.elecom.2018.09.006
|
[14]
|
黄常翼, 冯阳. 3D打印技术及应用现状[J]. 黄冈职业技术学院学报, 2019, 21(6): 126-129.
|
[15]
|
孟伟. 3D打印技术及应用趋势分析[J]. 科技创新与应用, 2021(11): 146-148.
|
[16]
|
Yang, C., Cao, Q., Puthongkham, P., et al. (2018) 3D-Printed Carbon Electrodes for Neurotransmitter Detection. Angewandte Chemie (International ed.), 57, 14255-14259. https://doi.org/10.1002/anie.201809992
|
[17]
|
Palenzuela, C.L.M. and Pumera, M. (2018) (Bio)Analytical Chemistry Enabled by 3D Printing: Sensors and Biosensors. Trends in Analytical Chemistry, 103, 110-118. https://doi.org/10.1016/j.trac.2018.03.016
|
[18]
|
崔庚彦, 宋艳芳. 光固化成型技术的特点及其应用[J]. 技术与市场, 2014, 21(9): 35-37.
|
[19]
|
顾玥, 王功, 段文艳, 等. 陶瓷光固化成型技术的应用与展望[J]. 硅酸盐学报, 2021, 49(5): 867-877.
|
[20]
|
Gross, B., Lockwood, S.Y. and Spence, D.M. (2017) Recent Advances in Analytical Chemistry by 3D Printing. Analytical Chemistry, 89, 57-70. https://doi.org/10.1021/acs.analchem.6b04344
|
[21]
|
Omar, M.H., Razak, K.A., Ab, W.M.N., et al. (2021) Recent Progress of Conductive 3D-Printed Electrodes Based upon Polymers/Carbon Nanomaterials Using a Fused Deposition Modelling (FDM) Method as Emerging Electrochemical Sensing Devices. RSC Advances, 11, 16557-16571. https://doi.org/10.1039/D1RA01987B
|
[22]
|
Ambrosi, A. and Pumera, M. (2016) 3D-Printing Technologies for Electrochemical Applications. Chemical Society Reviews, 45, 2740-2755. https://doi.org/10.1039/C5CS00714C
|
[23]
|
任大勇, 陈虎越, 王展. 油墨直写技术在可穿戴电子领域中的应用[J]. 电子技术, 2021, 50(7): 48-49.
|
[24]
|
Muoz, J. and Pumera, M. (2020) Accounts in 3D-Printed Electrochemical Sensors: Towards Monitoring of Environmental Pollutants. ChemElectroChem, 7, 3404-3413. https://doi.org/10.1002/celc.202000601
|
[25]
|
Mao, M., He, J., Li, X., et al. (2017) The Emerging Frontiers and Applications of High-Resolution 3D Printing. Micromachines, 8, Article 113. https://doi.org/10.3390/mi8040113
|
[26]
|
Tuan, D.N., Alireza, K., Gabriele, I., et al. (2018) Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges. Composites Part B, 143, 172-196.
https://doi.org/10.1016/j.compositesb.2018.02.012
|
[27]
|
高尧, 李玲梦, 孔祥威, 等. 3D打印用聚乳酸复合材料进展[J]. 塑料, 2022, 51(3): 73-76.
|
[28]
|
陈晖, 王磊, 郭振, 等. 基于增材制造的碳纤维/高分子复合材料研究现状[J]. 塑料工业, 2019, 47(10): 15-17.
|
[29]
|
刘森. 增材制造适用材料及产品机械性能研究[J]. 科技创新与应用, 2021, 11(17): 57-59.
|
[30]
|
陈宏庆, 马志勇, 张家彬, 等. 增材制造适用材料及产品机械性能研究[J]. 机械制造, 2019, 57(1): 1-6.
|
[31]
|
Siller, I.G., Preuss, J.A., Urmann, K., et al. (2020) 3D-Printed Flow Cells for Aptamer-Based Impedimetric Detection of E. coli Crooks Strain. Sensors (Basel), 20, Article No. 4421. https://doi.org/10.3390/s20164421
|
[32]
|
Roberto, P., Francisco, C., David, G., et al. (2019) Fully Integrated Screen-Printed Sulfide-Selective Sensor on a 3D-Printed Potentiometric Microfluidic Platform. Sensors & Actuators: B. Chemical, 290, 364-370.
https://doi.org/10.1016/j.snb.2019.03.132
|
[33]
|
Contreras-Naranjo, J.E., Perez-Gonzalez, V.H., Mata-Gómez, M.A., et al. (2021) Cost-Effective 3D-Printed-Enabled Fluidic Electrochemical Sensing Platform for Quantitative Electroanalytical Applications. Journal of the Electrochemical Society, 168, Article ID: 117504. https://doi.org/10.1149/1945-7111/ac3311
|
[34]
|
Sibug-Torres, S.M., Go, L.P., Castillo, V., et al. (2021) Fully Integrated 3D-Printed Electrochemical Cell with a Modified Inkjet-Printed Ag Electrode for Voltammetric Nitrate Analysis. Analytica Chimica Acta, 1160, Article ID: 338430. https://doi.org/10.1016/j.aca.2021.338430
|
[35]
|
de C., C.B.M., Griveau, S., Bedioui, F., et al. (2022) Stereolithography Based 3D-Printed Microfluidic Device with Integrated Electrochemical Detection. Electrochimica Acta, 407, Article ID: 139888.
https://doi.org/10.1016/j.electacta.2022.139888
|
[36]
|
Duarte, L.C., Baldo, T.A., Silva-Neto, H.A., et al. (2022) 3D Printing of Compact Electrochemical Cell for Sequential Analysis of Steroid Hormones. Sensors and Actuators: B. Chemical, 364, Article ID: 131850.
https://doi.org/10.1016/j.snb.2022.131850
|
[37]
|
Dong, Y., Min, X. and Kim, W.S. (2018) A 3-D-Printed Integrated PCB-Based Electrochemical Sensor System. IEEE Sensors Journal, 18, 2959-2966. https://doi.org/10.1109/JSEN.2018.2801459
|
[38]
|
Jiang, S., Zhao, J., Zhao, S., et al. (2022) Hybrid 3D Printed Integrated Microdevice for the Determination of Copper Ions in Human Body Fluids. Analytical and Bioanalytical Chemistry, 414, 4047-4057.
https://doi.org/10.1007/s00216-022-04049-9
|
[39]
|
刘瑶, 薛强, 王荣, 等. 电化学传感器检测不同水环境中砷(III)的研究进展[J]. 环境科学与技术, 2022, 45(5): 1-10.
|
[40]
|
Han, T., Kundu, S., Nag, A., et al. (2019) 3D Printed Sensors for Biomedical Applications: A Review. Sensors (Basel, Switzerland), 19, Article No. 1706. https://doi.org/10.3390/s19071706
|
[41]
|
Stefano, J.S., Kalinke, C., Da, R.R., et al. (2022) Electrochemical (Bio)Sensors Enabled by Fused Deposition Modeling-Based 3D Printing: A Guide to Selecting Designs, Printing Parameters, and Post-Treatment Protocols. Analytical Chemistry, 94, 6417-6429. https://doi.org/10.1021/acs.analchem.1c05523
|
[42]
|
Aya, A. and Bhavik, A.P. (2020) 3D-Printed Electrochemical Sensors: A New Horizon for Measurement of Biomolecules. Current Opinion in Electrochemistry, 20, 78-81. https://doi.org/10.1016/j.coelec.2020.04.009
|
[43]
|
Weng, B., Morrin, A., Shepherd, R., et al. (2014) Wholly Printed Polypyrrole Nanoparticle-Based Biosensors on Flexible Substrate. Journal of Materials Chemistry B, 2, 793-799. https://doi.org/10.1039/C3TB21378A
|
[44]
|
杨冬静, 陈海华, 付德刚. 载银石墨烯导电油墨打印电极的研究[J]. 现代化工, 2021, 41(11): 106-111.
|
[45]
|
王一博, 赵九蓬. 3D打印柔性可穿戴锂离子电池[J]. 材料工程, 2018, 46(3): 13-21.
|
[46]
|
Pãmyla, L.D.S., Vera, K., Hugo, C.L., et al. (2019) Enhanced Performance of 3D Printed Graphene Electrodes after Electrochemical Pre-Treatment: Role of Exposed Graphene Sheets. Sensors & Actuators: B. Chemical, 281, 837-848.
https://doi.org/10.1016/j.snb.2018.11.013
|
[47]
|
Browne, M.P., Novotný, F., Sofer, Z., et al. (2018) 3D Printed Graphene Electrodes’ Electrochemical Activation. ACS Applied Materials & Interfaces, 10, 40294-40301. https://doi.org/10.1021/acsami.8b14701
|
[48]
|
Vidakis, N., Petousis, M., Kourinou, M., et al. (2021) Additive Manufacturing of Multifunctional Polylactic Acid (PLA)—Multiwalled Carbon Nanotubes (MWCNTs) Nanocomposites. Nanocomposites, 7, 184-199.
https://doi.org/10.1080/20550324.2021.2000231
|
[49]
|
Li, H., et al. (2015) A Highly Sensitive Non-Enzymatic Glucose Sensor Based on Bimetallic Cu-Ag Superstructures. Biosensors and Bioelectronics, 63, 339-346. https://doi.org/10.1016/j.bios.2014.07.061
|
[50]
|
Kp, A.K., Kalyan, G., Osamah, A., et al. (2020) Metal-Plated 3D-Printed Electrode for Electrochemical Detection of Carbohydrates. Electrochemistry Communications, 120, Article ID: 106827.
https://doi.org/10.1016/j.elecom.2020.106827
|
[51]
|
Raquel, G.R., Rafael, M.C., Priscilla, J.Z., et al. (2020) Production of 3D-Printed Disposable Electrochemical Sensors for Glucose Detection Using a Conductive Filament Modified with Nickel Microparticles. Analytica Chimica Acta, 1132, 1-9. https://doi.org/10.1016/j.aca.2020.07.028
|
[52]
|
殷洁, 胡云涛, 刘慧, 等. 基于电沉积技术构建聚苯胺/海藻酸膜及电化学性能研究[J]. 材料研究学报, 2022, 36(4): 314-320.
|
[53]
|
Siddiqui, H., Singh, N., Chauhan, V., et al. (2021) Electrochemical 3D Printed Copper Garden for Nitrate Detection. Materials Letters, 305, Article ID: 130795. https://doi.org/10.1016/j.matlet.2021.130795
|
[54]
|
鲁文娟, 李阳. 基于3D打印技术构建石墨烯电化学生物传感器及其应用研究[J]. 硅酸盐通报, 2022, 41(3): 1069-1077.
|
[55]
|
Tay, S.C., Muhammad, Z.M.N., Adriano, A., et al. (2017) 3D-Printed Metal Electrodes for Electrochemical Detection of Phenols. Applied Materials Today, 9, 212-219. https://doi.org/10.1016/j.apmt.2017.07.005
|
[56]
|
Vassiliki, K., Anastasios, E. and Christos, K. (2019) Single-Step Fabrication of an Integrated 3D-Printed Device for Electrochemical Sensing Applications. Electrochemistry Communications, 103, 100-103.
https://doi.org/10.1016/j.elecom.2019.05.008
|