撤稿：基于t-HPS加工的Pb-Sn合金室温下超塑性研究
RETRACTED:Study on Superplasticity of Pb-SnAlloy Processed by t-HPS at RoomTemperature
DOI: 10.12677/MS.2022.1210116, PDF, HTML, 下载: 336  浏览: 483 
作者: 杨千典, 刘瑛：南京理工大学材料科学与工程学院，江苏南京；邹运兰*：浙江万里学院大数据与软件工程学院，浙江宁波
关键词: 铅锡合金；超塑性；t-HPS加工；晶粒生长速率；Lead-Tin Alloy； Superplasticity； t-HPS Processing； Grain Growth Rate
摘要: 基于t-HPS加工的Pb-Sn合金室温下超塑性研究”一文刊登在2022年10月出版的《材料科学》2022年第12卷第10期第1039-1050页上。因数据未经课题组验证、核实，可能存在重大风险。根据国际出版流程，编委会现决定撤除此稿件，保留原出版出处：
Abstract: 杨千典, 刘瑛, 邹运兰. 基于t-HPS加工的Pb-Sn合金室温下超塑性研究[J]. 材料科学, 2022, 12(10): 1039-1050. https://doi.org/10.12677/MS.2022.1210116
文章引用：杨千典, 刘瑛, 邹运兰. 撤稿：基于t-HPS加工的Pb-Sn合金室温下超塑性研究[J]. 材料科学, 2022, 12(10): 1039-1050. https://doi.org/10.12677/MS.2022.1210116

参考文献

[1] 陈锦, 廖荣跃, 孙泉, 刘晓东, 叶凌英. 晶粒组织对7B04铝合金超塑性变形机理的影响[J]. 中南大学学报(自然科学版), 2021(9): 3121-3131
[2] 吴诗惇. 金属超塑性变形理论[M]. 北京: 国防工业出版社, 1997: 1-98.
[3] Geckinli, A.E. and Barrett, C.R. (1976) Superplasticity Deformation of the Pb-Sn Eutectic. Journal of Mate-rials Science, 11, 510-521.
https://doi.org/10.1007/BF00540932
[4] Ma, Y. and Langdon, T.G. (1994) Factors Influencing the Exceptional Ductility of a Superplasticity Pb-62 Pct Sn Alloy. Metallurgical and Materials Transactions A, 25, 2309-2311.
https://doi.org/10.1007/BF02652333
[5] Mohamed, F.A., Ahmed, M. and Langdon, T.G. (1977) Factors Influencing Ductility in the Superplastic Zn-22 Pct Al Eutectoid. Metallurgical Transactions A, 8, 933-938.
https://doi.org/10.1007/BF02661575
[6] Ahmed, M.M.I. and Langdon, T.G. (1983) The Effect of Grain Size on Ductility in the Superplastic Pb-Sn Eutectic. Journal of Materials Science Letters, 2, 337-340.
https://doi.org/10.1007/BF00726322
[7] Wilkinson, D.S. and Caceres, C.H. (1984) An Evaluation of Available Data for Strain-Enhanced Grain Growth during Superplastic Flow. Journal of Materials Science Letters, 3, 395-399.
https://doi.org/10.1007/BF00724376
[8] Sato, E. and Kuribayashi, K. (1993) Superplasticity and Deformation Induced Grain Growth. ISIJ International, 33, 825-832.
https://doi.org/10.2355/isijinternational.33.825
[9] Lin, K., Li, Z., Liu, Y., et al. (2022) Exploiting Tube High-Pressure Shearing to Prepare a Microstructure in Pb-Sn Alloys for Unprecedented Superplasticity. Scripta Materialia, 209, Article ID: 114390.
https://doi.org/10.1016/j.scriptamat.2021.114390
[10] Karakaya, I. and Thompson, W.T. (1988) The Pb-Sn (Lead-Tin) System. Journal of Phase Equilibria, 9, 144-152.
https://doi.org/10.1007/BF02890552
[11] Kang, J. and Conrad, H. (2001) Microstructure Coarsening during Static Annealing of 60Sn40Pb Solder Joints: II Eutectic Coarsening Kinetics. Journal of Electronic Materials, 30, 1303-1307.
https://doi.org/10.1007/s11664-001-0115-y
[12] 曹富荣, 雷方, 崔建忠, 等. 超塑变形晶粒长大模型的修正与实验验证[J]. 金属学报, 1999, 35(7): 770-772.
[13] Wang, J.T., Li, Z., Wang, J. and Langdon, T.G. (2012) Principles of Severe Plastic Deformation Using Tube High Pressure Shearing. Scripta Materialia, 67, 810-813.
https://doi.org/10.1016/j.scriptamat.2012.07.028
[14] 孟佳杰. 高纯铝周向高压剪切变形过程的数值模拟及试验研究[D]: [硕士学位论文]. 南京: 南京理工大学, 2020: 1-19.

为你推荐