撤稿：低直径比圆柱随机填充床化学链燃烧数值模拟
RETRACTED：Numerical Simulation of Chemical Looping Combustion in a Cylindrical Random Packed Bed with Low Diameter Ratio
DOI: 10.12677/MOS.2021.102053, PDF, HTML, 下载: 446  浏览: 1,307 
作者: 韦宗波：上海理工大学能源与动力工程学院，上海
关键词: 随机填充床；化学链燃烧；低直径比；数值模拟；Random Packed Bed； Chemical Looping Combustion； Low Diameter Ratio； Numerical Simulation
摘要: 撤稿声明：“低直径比圆柱随机填充床化学链燃烧数值模拟”一文刊登在2021年5月出版的《建模与仿真》第10卷第2期第527-535页上。因该文数据未获授权，作者申请撤稿。编委会现决定撤除此稿件，保留原出版出处：韦宗波. 低直径比圆柱随机填充床化学链燃烧数值模拟[J]. 建模与仿真, 2021, 10(2): 527-535. https://doi.org/10.12677/MOS.2021.102053并对此撤稿带来的不便致以歉意。
文章引用：  

参考文献

[1] Rubin, E.S., Rao, A.B. and Chen, C. (2005) Comparative Assessments of Fossil Fuel Pop Plants with CO2 Capture and Storage. Greenhouse Gas Control Technologies, 1, 285-293.
https://doi.org/10.1016/B978-008044704-9/50029-X
[2] Li, H., Yan, J., Yan, J., et al. (2009) Impurity Impacts on the Purification Process in Oxy-Fuel Combustion Based CO2 Capture and Storage System. Applied Energy, 86, 202-213.
https://doi.org/10.1016/j.apenergy.2008.05.006
[3] Richter, H.J. and Knoche, K.F. (1983) Reversibility of Combustion Process, Efficiency and Costing, Second Law Analysis of Processes. ACS Symposium Series 235, Washington DC, 71-85.
https://doi.org/10.1021/bk-1983-0235.ch003
[4] 刘海涛, 高海潮, 高志芳. 化学链燃烧工艺中载氧体的研究进展[J]. 洁净煤技术, 2018, 24(5): 12-19.
[5] 金红光. 新颖化学链燃烧与空气湿化燃气轮机循环[J]. 工程热物理学报, 2000, 21(2): 138-141.
[6] Noorman, S., van Sint Annaland, M. and Kuipers (2007) Packed Bed Reactor Technology for Chemical-Looping Combustion. Industrial & Engineering Chemistry Research, 46, 4212-4220.
https://doi.org/10.1021/ie061178i
[7] Noorman, S., Annaland, M.V.S. and Kuipers, J.A.M. (2010) Experimental Validation of Packed Bed Chemical-Looping Combustion. Chemical Engineering Science, 65, 92-97.
https://doi.org/10.1016/j.ces.2009.02.004
[8] Noorman, S., Gallucci, F., Annaland, M.V.S., et al. (2011) A The-oretical Investigation of CLC in Packed Beds. Part 1: Particle Model. Chemical Engineering Journal, 167, 297-307.
https://doi.org/10.1016/j.cej.2010.12.068
[9] Noorman, S., Gallucci, F., Annaland, M.V.S., et al. (2011) A The-oretical Investigation of CLC in Packed Beds. Part 2: Reactor Model. Chemical Engineering Journal, 167, 369-376.B.
https://doi.org/10.1016/j.cej.2011.01.012
[10] 郭雪岩. CFD方法在固定床反应器传热研究中的应用[J]. 化工学报, 2008(8): 1914-1922.
[11] Huo, G. and Guo, X. (2021) Numerical Analyses of Heterogeneous CLC Reaction and Transport Processes in Large Oxygen Carrier Particles. Processes, 9, 125.
https://doi.org/10.3390/pr9010125
[12] Partopour, B. and Dixon, A.G. (2017) An Integrated Workflow for Re-solved-Particle Packed Bed Models with Complex Particle Shapes. Powder Technology, 322, 258-272.
https://doi.org/10.1016/j.powtec.2017.09.009
[13] van den Aarsen, F.G. (1985) Fluidised Bed Wood Gasifier: Performance and Modelling. Ph.D. Dissertation, University of Twente, Enschede.

为你推荐