[1]
|
叶之皓. 我国装配式钢结构住宅现状及对策研究[D]: [硕士学位论文]. 南昌: 南昌大学, 2012.
|
[2]
|
周子淳. 一种新型的第三类高层钢结构住宅体系的试验研究及可行性分析[D]: [硕士学位论文]. 太原: 太原理工大学, 2016.
|
[3]
|
卢俊凡, 王佳, 李玮蒙, 等. 装配式钢结构住宅体系的发展与应用[J]. 城市住宅, 2014(8): 26-29.
|
[4]
|
王雅虹. 山西省装配式钢结构住宅适宜技术研究[D]: [硕士学位论文]. 太原: 太原理工大学, 2017.
|
[5]
|
王双, 王波, 侯兆新, 等. 自锁式单向螺栓工程影响现状与研究方向[J]. 钢结构, 2016, 31(9): 30-33.
|
[6]
|
雷宏刚, 邱斌, 姬艳玲. 装配式轻钢结构住宅中自攻螺丝连接受力性能研究评述[J]. 太原理工大学学报, 2017, 48(3): 265-274.
|
[7]
|
徐婷, 王伟, 陈以一. 国外单边螺栓研究现状[J]. 钢结构, 2015, 30(8): 27-33.
|
[8]
|
陈珂璠, 李宇晗, 陆金钰. 单边紧固螺栓在结构工程中应用的研究进展[J]. 江苏建筑, 2016(1): 27-30.
|
[9]
|
吴玉全, 汪发. 梁-钢管柱节点暗螺栓连接研究概述[J]. 低温建筑技术, 2011, 33(2): 48-50.
|
[10]
|
赵金峰. 装配式钢管混凝土柱-钢梁节点力学性能试验研究[D]: [硕士学位论文]. 沈阳: 沈阳建筑大学, 2011.
|
[11]
|
张梁, 陈以一. 方钢管柱与H型钢梁连接形式评述[J]. 结构工程师, 2009, 25(4): 130-137.
|
[12]
|
Wang, Z.Y. and Wang, Q.Y. (2016) Yield and Ultimate Strengths Determination of a Blind Bolted Endplate Connection to Square Hollow Section Column. Engineering Structures, 111, 345-369.
https://doi.org/10.1016/j.engstruct.2015.11.058
|
[13]
|
曲慧, 潘洪伟, 刘艳芝, 等. 考虑混凝土粘结效应的盲眼螺栓抗拉性能研究[J]. 西南交通大学学报, 2017, 52(5): 985-993.
|
[14]
|
潘洪伟. 盲眼螺栓Hollo-bolt抗拉性能研究[D]: [硕士学位论文]. 烟台: 烟台大学, 2017.
|
[15]
|
王雅纯, 林万雅. 单向固定螺栓和单向连接螺栓[J]. 工业建筑, 1991(12): 14-17.
|
[16]
|
汤镇州, 覃健桂. 单边螺栓拉拔试验的有限元模拟[J]. 低温建筑技术, 2018, 40(5): 37-40.
|
[17]
|
柴文娟. T型件单边高强螺栓连接节点力学性能试验研究及有限元分析[D]: [硕士学位论文]. 青岛: 青岛理工大学, 2017.
|
[18]
|
朱绪林. 常温及火灾下单边螺栓T型节点抗拉性能研究[D]: [硕士学位论文]. 济南: 山东大学, 2017.
|
[19]
|
李德山, 陶忠, 王志滨. 钢管混凝土柱-钢梁单边螺栓连接节点静力性能试验研究[J]. 湖南大学学报, 2015, 42(3): 43-49.
|
[20]
|
郭琨. 轻钢结构新型全螺栓连接螺栓力学性能研究[D]: [硕士学位论文]. 石河子市: 石河子大学, 2014.
|
[21]
|
郭琨, 何明胜, 田振山. 新型全螺栓连接承载力的试验研究及性能分析[J]. 石河子大学学报, 2014, 32(4): 504-510.
|
[22]
|
何明胜, 李志强, 贺泽峰. 新型单边螺栓承载力试验研究[J]. 兰州理工大学学报, 2016, 42(2): 118-123.
|
[23]
|
李望芝, 何明胜, 贺泽锋, 刘礼. 新型单边全螺栓连接螺栓抗拉承载力影响因素研究[J]. 建筑结构, 2017, 47(6): 29-34.
|
[24]
|
李望之. 钢框架新型全螺栓连接节点抗震性能试验研究[D]: [硕士学位论文]. 石河子市: 石河子大学, 2017.
|
[25]
|
蒋蕴涵, 李国强, 侯兆新, 张杰华, 陆烨. 8.8级国产单向螺栓连接轴向拉伸刚度试验研究[J]. 建筑钢结构进展, 2018, 20(5): 22-30.
|
[26]
|
简小刚, 谢学兴, 等. Hol-lo-Bolt单向螺栓套管肢断裂原因分析[J]. 理化检验: 物理分册, 2017, 53(9): 679-682.
|
[27]
|
王培军, 乌兰托亚, 朱绪林. 单边螺栓T型节点火灾高温下抗拉性能[J]. 防灾减灾工程学报, 2018(3): 425-431.
|
[28]
|
刘礼. 钢框架新型全螺栓连接节点承载力计算方法研究[D]: [硕士学位论文]. 石河子市: 石河子大学, 2018.
|
[29]
|
王冬花, 亓萌. 正弯矩作用下端板连接钢管混凝土组合节点的计算简化模型[J]. 景德镇学院学报, 2018, 33(3): 10-14.
|
[30]
|
谭丁, 刘艳芝, 等. 盲眼螺栓连接方钢管混凝土T型节点的抗拉性能[J]. 长沙理工大学学报(自然科学版), 2018, 15(3): 64-70.
|
[31]
|
Tabsh, S.W. and Mourad, S. (1997) Resistance Factors for Blind Bolts in Direct Tension. Engineering Structures, 19, 995-1000. https://doi.org/10.1016/S0141-0296(97)00011-4
|
[32]
|
Pitrakkos, T. and Tizani, W. (2013) Experimental Behaviour of a Novel Anchored Blind-Bolt in Tension. Engineering Structures, 49, 905-919. https://doi.org/10.1016/j.engstruct.2012.12.023
|
[33]
|
Jeddi, M.Z. and Sulong, N.H.R. (2018) Pull-Out Performance of a Novel Anchor Blind Bolt (TubeBolt) for Beam to Concrete-Filled Tubular (CFT) Column Bolted Connections. Thin-Wall Structures, 124, 402-414.
https://doi.org/10.1016/j.tws.2017.12.028
|
[34]
|
Agheshlui, H., Goldsworthy, H., Gad, E. and Fernando, S. (2016) Tensile Behaviour of Anchored Blind Bolts in Concrete Filled Square Hollow Sections. Materials and Structures, 49, 1511-1525.
https://doi.org/10.1617/s11527-015-0592-8
|
[35]
|
刘飞. 单面螺栓连接及装配式钢结构节点理论与试验研究[D]: [硕士学位论文]. 南京: 东南大学, 2015.
|
[36]
|
Ellison, S. and Tizanj, W. (2004) Behaviour of Blind Bolted Connections to Concrete Filled Hollow Sections. Structural Engineer, 82, 16-17.
|
[37]
|
丁娟, 张其林, 等. 多层预拼装钢结构系统特殊连接螺栓性能试验研究[J]. 结构工程师, 2014, 30(4): 112-117.
|
[38]
|
李国强, 张杰华, 等. 钢结构用国产自锁式8.8级单向螺栓承载性能[J]. 建筑科学与工程学报, 2018, 35(1): 9-16.
|
[39]
|
李国强, 张杰华. 钢结构用自锁式单向螺栓抗拉刚度分析模型[J]. 建筑科学与工程学报, 2018, 35(2): 1-7.
|
[40]
|
Barnett, T.C., Tizani, W. and Nethercot, D.A. (2000) Blind Bolted Moment Resisting Connections to Structural Hollow Sections. In: Connections in Steel Structures IV: Steel Connections in the New Millennium, Roanoke, VA.
|
[41]
|
Oktavianus, Y., Chang, H.F., Goldworthy, H.M. and Gad, E.F. (2017) Component Model for Pull-Out Behaviour of Headed Anchored Blind Bolt within Concrete Filled Circular Hollow Section. Engineering Structures, 148, 210-224.
https://doi.org/10.1016/j.engstruct.2017.06.056
|
[42]
|
吴院生. 冷弯方管柱——H型钢梁节点连接承载力研究[D]: [硕士学位论文]. 武汉: 武汉理工大学, 2005.
|
[43]
|
Yeomans, N.F. (1998) Rectangular Hollow Section Column Connections Using the Lindapter HolloBolt. 8th International Symposium on Tubular Structures, 8, 559-566.
|
[44]
|
Liu, Y., Málaga-Chuquitaype, C.C. and Elghazouli, A.Y. (2012) Behaviour of Beam-to-Tubular Column Angle Connections under Shear Loads. Engineering Structures, 42, 434-456. https://doi.org/10.1016/j.engstruct.2012.04.027
|
[45]
|
Liu, Y., Málaga-Chuquitaype, C.C. and Elghazouli, A.Y. (2012) Response and Component Characterization of Semi-Rigid Connections to Tubular Columns under Axial Loads. Engineering Structures, 41, 510-532.
https://doi.org/10.1016/j.engstruct.2012.03.061
|
[46]
|
Liu, Y.Z. (2012) Behaviour of Beam-to-Tubular Column Connections under Extreme Loading Conditions. Doctoral Thesis, Imperial College, London.
|
[47]
|
Liu, Y., Mála-ga-Chuquitaype, C.C. and Elghazouli, A.Y. (2014) Behaviour of Open Beam-to-Tubular Column Angle Connections under Combined Loading Conditions. Steel and Composite Structures, 16, 157-185.
https://doi.org/10.12989/scs.2014.16.2.157
|
[48]
|
刘康, 李国强, 等. 方钢管柱内套筒柱-柱螺栓拼接节点受力性能试验研究[J]. 建筑结构学报, 2018, 39(10): 112-121.
|
[49]
|
Satasivam, S., Feng, P., Bai, Y. and Caprani, C. (2017) Composite Actions within Steel-FRP Composite Beam Systems with Novel Blind Bolt Shear Connections. Engineering Structures, 138, 63-73.
https://doi.org/10.1016/j.engstruct.2017.01.068
|
[50]
|
张齐, 张其林, 丁娟. 多层预拼装钢结构系统特殊连接螺栓抗剪性能试验研究[J]. 结构工程师, 2014, 30(5): 154-159.
|
[51]
|
李维伟. 单面锁紧螺栓端板连接钢框架梁柱节点力学性能研究[D]: [硕士学位论文]. 武汉: 武汉理工大学, 2006.
|
[52]
|
王静峰, 韩林海, 郭水平. 半刚性钢管混凝土框架端板节点试验研究及数值模拟[J]. 建筑结构学报, 2009(S2): 219-224.
|
[53]
|
王静峰, 龚旭东, 等. 钢管混凝土边柱与组合梁端板连接的抗震试验研究[J]. 土木工程学报, 2013(11): 44-53.
|
[54]
|
王静峰, 王海涛, 等. 钢管混凝土柱-钢梁单边高强螺栓端板连接框架的拟静力试验研究[J]. 土木工程学报, 2017(4): 13-21.
|
[55]
|
黄春晓. 方中空夹层钢管混凝土半刚性节点的数值分析和受力性能研究[D]: [硕士学位论文]. 合肥工业大学, 2016.
|
[56]
|
张娜. 圆中空夹层钢管混凝土柱半刚性节点的抗震试验与理论分析研究[D]: [硕士学位论文]. 合肥: 合肥工业大学, 2017.
|
[57]
|
贺泽峰. 新型全螺栓结构螺栓群承载力研究[D]: [硕士学位论文]. 石河子市: 石河子大学, 2016.
|
[58]
|
彭啸. 单边螺栓端板连接钢管混凝土框架的抗震试验与理论研究[D]: [硕士学位论文]. 合肥: 合肥工业大学, 2017.
|
[59]
|
刘礼, 何明盛. 端板厚度对新型全螺栓连接节点的抗震性能影响[J]. 钢结构, 2018, 33(5): 17-22.
|
[60]
|
焦健. 方钢管与H型钢梁全螺栓节点承载力试验研究及有限元分析[D]: [硕士学位论文]. 石河子市: 石河子大学, 2016.
|
[61]
|
Li, B.B., Wang, J.F., Lu, Y., Zhang, Z.D. and Wang, J.X. (2019) Seismic Response Tests and Analytical Assessment of Blind Bolted Assembly CFST Frames with Beam-Connected SPSWs. Engineering Structures, 178, 343-360.
https://doi.org/10.1016/j.engstruct.2018.10.009
|
[62]
|
Mourad, S., Ghobarah, A. and Korol, R.M. (1995) Dynamic Response of Hollow Section Frames with Bolted Moment Connections. Engineering Structures, 17, 737-748. https://doi.org/10.1016/0141-0296(95)00002-O
|
[63]
|
Mourad, S., Korol, R.M. and Ghobarah, A. (2011) Design of Extended End-Plate Connections for Hollow Section Columns. Canadian Journal of Civil Engineering, 23, 277-286. https://doi.org/10.1139/l96-029
|
[64]
|
Wang, J.F., Li, B.B., Wang, D.H. and Zhao, C.F. (2017) Cyclic Testing of Steel Beam Blind Bolted to CFST Column Composite Frames with SBTD Concrete Slabs. Engineering Structures, 148, 293-311.
https://doi.org/10.1016/j.engstruct.2017.06.065
|
[65]
|
Oktavianus, Y., Goldsworthy, H.M. and Gad, E.F. (2017) Cyclic Behaviour of Individual Double Headed Anchored Blind Bolts within CFST. Journal of Constructional Steel Research, 133, 522-534.
https://doi.org/10.1016/j.jcsr.2017.03.004
|
[66]
|
王志宇, 王清远, 等. 基于屈服线理论的螺栓端板连接方钢管柱承载力计算模型研究[J]. 建筑结构学报, 2016(6): 160-173.
|
[67]
|
Korol, R.M., Ghobarah, A. and Mourad, S. (1993) Blind Bolting W-Shape Beams to HSS Columns. Journal of Structural Engineering, 119. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:12(3463)
|
[68]
|
李国强, 段炼, 等. H型钢梁与矩形钢管柱外伸式端板单向螺栓连接节点承载力试验与理论研究[J]. 建筑结构学报, 2015(9): 91-100.
|
[69]
|
李国强, 段炼, 等. H型钢梁与矩形钢管柱端板单向螺栓连接节点初始转动刚度性能[J]. 同济大学学报(自然科学版), 2018, 46(5): 565-573.
|
[70]
|
李国强, 段炼, 等. H型钢梁与矩形钢管柱平齐端板单向螺栓节点承载力性能[J]. 同济大学学报, 2018, 46(2): 162-169.
|
[71]
|
李德山, 王志滨. 加强型单边螺栓连接节点静力性能有限元分析[J]. 华侨大学学报, 2016, 37(4): 427-430.
|
[72]
|
李德山, 王志滨. 方钢管混凝土柱-钢梁单边螺栓连接节点静力性能有限元分析[J]. 福州大学学报, 2016, 44(4): 543-547.
|
[73]
|
管长勇. 盲眼螺栓连接方钢管柱-H型钢梁节点抗连续倒塌性能分析[D]: [硕士学位论文]. 长沙: 湖南大学, 2017.
|
[74]
|
王燕, 郏书朔, 柴文娟. 单边高强螺栓T型连接节点试验研究及数值模拟[J]. 天津大学学报(自然科学与工程技术版), 2018, 51(A1): 78-85.
|
[75]
|
Elghazouli, A.Y., Mála-ga-Chuquitaype, C., Castro, J.M. and Orton, A.H. (2009) Experimental Monotonic and Cyclic Behaviour of Blind-Bolted Angle Connections. Engineering Structures, 31, 2540-2553.
https://doi.org/10.1016/j.engstruct.2009.05.021
|
[76]
|
郭水平. 薄壁钢管混凝土框架梁柱端板连接节点的静力性能[D]: [硕士学位论文]. 合肥: 合肥工业大学, 2010.
|
[77]
|
陈莉萍. 半刚性钢管混凝土框架端板连接节点静力试验和理论分析[D]: [硕士学位论文]. 合肥: 合肥工业大学, 2010.
|
[78]
|
刘坚, 高奎, 等. 采用外套管式单边螺栓端板连接节点钢管混凝土框架滞回性能研究[J]. 建筑科学, 2017, 33(1): 88-95.
|
[79]
|
刘坚, 高奎, 等. 带外套管钢管混凝土柱与钢梁节点力学性能研究[J]. 郑州大学学报(工学报), 2015, 36(5): 58-62.
|
[80]
|
France, J.E. Davison, J.B. and Kirby, P.A. (1999) Strength and Rotational Response of Moment Connections to Tubular Columns Using Flowdrill Connectors. Journal of Constructional Steel Research, 50, 1-14.
https://doi.org/10.1016/S0143-974X(98)00235-1
|
[81]
|
France, J.E. Davison, J.B. and Kirby, P.A. (1999) Strength and Rotational Stiffness of Simple Connections to Tubular Columns Using Flowdrill Connectors. Journal of Construc-tional Steel Research, 50, 15-34.
https://doi.org/10.1016/S0143-974X(98)00236-3
|
[82]
|
France, J.E. Davison, J.B. and Kirby, P.A. (1999) Mo-ment-Capacity and Rotational Stiffness of Endplate Connections to Concrete-Filled Tubular Columns with Flowdrilled Connectors. Journal of Constructional Steel Research, 50, 35-48. https://doi.org/10.1016/S0143-974X(98)00237-5
|
[83]
|
张琳. 半刚性钢管混凝土框架端板连接节点的抗震性能试验与理论研究[D]: [硕士学位论文]. 合肥: 合肥工业大学, 2012.
|
[84]
|
王冬花, 王静峰, 等. 装配式钢管混凝土组合框架的抗震性能试验研究[J]. 土木工程学报, 2017, 50(8): 20-28.
|
[85]
|
史伟伟, 王静峰, 等. 高温下方钢管柱与钢梁外伸端板连接的力学性能及破坏机理[C]//中国力学学会. 第21届全国结构工程学术会议论文集: 第3册. 工程力学杂志社, 2012: 90-95.
|
[86]
|
Pathirana, S.W., Uy, B., Mirza, O. and Zhu, X. (2016) Flexural Behaviour of Composite Steel-Concrete Beams Utilising Blind Bolt Shear Connectors. Engineering Structures, 114, 181-194.
https://doi.org/10.1016/j.engstruct.2016.01.057
|
[87]
|
Wang, W., Li, M.X., Chen, Y.Y. and Jian, X.G. (2017) Cyclic Behavior of Endplate Connections to Tubular Columns with Novel Slip-Critical Blind Bolts. Engineering Structures, 148, 949-962.
https://doi.org/10.1016/j.engstruct.2017.07.015
|
[88]
|
Tao, Z., Hassan, M.K., Song, T.-Y. and Han, L.-H. (2016) Experimental Study on Blind Bolted Connections to Concrete-Filled Stainless Steel Columns. Journal of Constructional Steel Research, 128, 825-838.
https://doi.org/10.1016/j.jcsr.2016.10.016
|
[89]
|
Tizani, W. and Pitrakkos, T. (2015) Performance of T-Stub to CFT Joints Using Blind Bolts with Headed Anchors. Journal of Structural Engineering, 141, 1-12. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001169
|
[90]
|
Thai H.-T., Vo T.P., Nguyen T.-K. and Pham, C.H. (2017) Explicit Simulation of Bolted Endplate Composite Beam-to-CFST Column Connections. Thin-Wall Structures, 119, 749-759. https://doi.org/10.1016/j.tws.2017.07.013
|
[91]
|
Wang, Z.Y., Tizani, W. and Wang, Q.Y. (2010) Strength and Initial Stiffness of a Blind-Bolt Connection Based on the T-Stub Model. Engineering Structures, 32, 2505-2517. https://doi.org/10.1016/j.engstruct.2010.04.005
|
[92]
|
Lee, J., Goldsworthy, H.M. and Gad, E.F. (2010) Blind Bolted T-Stub Connections to Unfilled Hollow Section Columns in Low Rise Structures. Journal of Construc-tional Steel Research, 66, 981-992.
https://doi.org/10.1016/j.jcsr.2010.03.016
|
[93]
|
李孝龙, 高敏. CFST柱-钢梁单边螺栓端板连接节点弯矩-转角关系研究[J]. 建筑与装饰, 2018(21): 65-66.
|