海洋钻修机模块载荷工况分析
Analysis on Load Project of Ocean Well Servicing Module
DOI: 10.12677/MET.2015.42017,
PDF, HTML, XML,
被引量
下载:
2,520 浏览:
6,430
作者:
程 鹏, 李全星, 颜岁娜, 赖晨晨, 杨 鹏:国家油气钻井装备工程技术研究中心,陕西 宝鸡;刘刚强:宝鸡石油机械有限责任公司,陕西 宝鸡
关键词:
海洋钻修机模块;ANSYS;有限元分析;载荷工况分析;Ocean Well Drilling and Servicing Module; ANSYS; Finite Element Analysis; Load Case Analysis
摘要:
以QHD32-6项目中研制的2250KN海洋钻修机模块为例,ANSYS有限元计算进行工况分析。对各工况分析计算中涉及到的规范及要求进行详解,并对计算中可能出现的问题进行分析,并形成有效且合理的工况分析载荷列表,为有限元计算提供核心依据。
Abstract:
Aiming at 2250kN ocean well drilling and servicing desktop module which is made during QHD32-6 project, the article analyzes working condition with ANSYS finite element calculation, explains the specifications and requirements which are involved in the analysis and calculation of each working condition, and construes the possible problems in calculation, then forms reliable and reasonable load case analysis lists that provide the core basis for the following finite element calculation.
参考文献
[1]
|
毕小钧, 程鹏, 杨秀菊, 等 (2014) 2250kN海洋钻修机模块设计. 石油机械, 11, 155-158.
|
[2]
|
周莉莉, 黄亮, 徐晓磊, 等 (2013) HXJ158C型海洋修井机有限元计算与分析. 石油机械, 6, 63-67.
|
[3]
|
周宁, 等 (2007) APDL高级工程应用实例分析与二次开发. 第一版, 中国水利水电出版社, 北京.
|
[4]
|
张辉, 冯利杰, 王泽, 等 (2014) HJJ675/52-T型海洋井架在风暴自存下的特性分析. 石油机械, 12, 48-51.
|
[5]
|
李清斌 (2014) 海洋工程船舶直升机甲板模块设计计算. 石油矿场机械, 9, 33-36.
|
[6]
|
胡晶磊, 祁秀芳 (2014) JJ675/48-K型井架起升过程力学分析. 石油矿场机械, 10, 97-99.
|