Y2O3对半钢轧辊激光熔覆层的影响
Influence of Y2O3 on the Laser Cladding Layer for Semi-Steel Rolls
摘要:
在半钢轧辊表面激光熔覆的合金粉末中添加1.0 wt%含量的稀土氧化物Y2O3,产生了显著的固熔强化和弥散强化作用,熔覆组织高度细化,产生显著的晶粒细化和强韧性作用,且碳化物的弥散和均匀分布可以有效地阻止晶粒长大,避免热影响区片状马氏体的急剧增加,从而有效的防止裂纹的产生。可以在很大程度上提高半钢轧辊的耐磨性、硬度、抗冷热疲劳强度等各项性能,取得了良好的使用效果。
Abstract: When adding 1.0 wt% rare earth oxide Y2O3 to laser cladding alloy powder on the surface of semi- steel rolls, it made a significant effect on solid fusion strengthening and dispersion strengthening, the microstructure of cladding layer was highly refined, and had a significant role in grain refine-ment and toughness. In addition, the dispersion of carbide and its uniform distribution could pre-vent grain growth effectively, avoided the dramatical increasing of lamellar martensite in the heat affected zone, thus prevented the generation of cracks effectively. It largely improved the semi- steel rolls wear resistance, hardness, resistance to cold and hot fatigue strength, so it obtained good using effect.
参考文献
[1]
|
刘其斌 (2007) 激光加工技术及其应用. 冶金工业出版社, 北京.
|
[2]
|
张永康 (2004) 激光加工技术. 化学工业出版社, 北京.
|
[3]
|
胡传炘 (2004) 表面处理手册. 北京工业大学出版社, 北京.
|
[4]
|
束德林 (2006) 工程材料力学性能. 机械工业出版社, 北京.
|
[5]
|
谢建新 (2004) 材料加工新技术与新工艺学. 冶金工业出版社, 北京.
|
[6]
|
徐洲 (2004) 材料加工原理. 第二版, 科学出版社, 北京.
|
[7]
|
马运哲, 董世运, 徐滨士 (2006) CeO2对激光熔覆Ni基合金涂层组织与性能的影响. 中国表面工程, 19, 7-11.
|