基于Pro/Engineer的蜗杆程序化设计
The Programmed Design of Worm Based on Pro/Engineer
摘要: 本文以便携式小型旋耕机蜗杆减速器的设计方法为基础,使用Pro/ENGINEER的二次开发软件包Pro/TOOLKIT开发了蜗杆的程序化设计系统。该设计系统界面简单、直观,操作方便,降低了设计者的工作量,缩短了蜗杆蜗轮齿廓曲线绘制的设计周期,并易于进行蜗杆传动的运动仿真及蜗杆减速器的运动分析。
Abstract:
Based on the design of worm transmission in compact type rotocultivators, Pro/TOOLKIT is applied to the development of a programmed design system for the design of worm. This programmed design system is characterized by a simple and visualized interface and easy operation, which saves the labor of the designers and shortens the design process of worm tooth-profile. This design system is also helpful in the motion simulation of worm transmission and motion analysis of worm reducer.
参考文献
[1]
|
盛庆伟, 等. 基于Pro/E的发动机连杆设计系统开发[J]. 机械设计与制造, 2013(2): 94-99.
|
[2]
|
张继春. Pro/ENGINEER二次开发实用教程[M]. 北京: 北京大学出版社, 2003.
|
[3]
|
李世国. Pro/TOOLKIT程序设计[M]. 北京: 机械工业出版社, 2003.
|
[4]
|
陈天华. 面向对象程序设计与Visual C++6.0教程[M]. 北京: 清华大学出版社, 2013.
|