110~220 kV电力电缆金属屏蔽层环流控制标准的探讨
Discussion on Circulation Control Standard of Metal Shield Layer in 110 - 220 kV Power Cable
摘要: 根据对不同金属屏蔽层接地方式、不同敷设排列方式情况下的电缆金属屏蔽层感应电压及环流的计算,分析各种影响因素对环流值大小的影响,结合湖北地区110 kV及以上高压电力电缆运行现状,给出金属屏蔽层环流控制标准的参考值。
Abstract:
Based on calculations of induced voltage and circulation of metal shield layer in cable, regarding different grounding modes and different arrangement, the influence of various factors on circulation is investigated. The reference values of circulation control standard in metal shield layer are given, according to operation status of high voltage power cables of 110 kV or above in Hubei province.
参考文献
[1]
|
Heinhold, L., Stubbe, R.(德) (2001) 电力电缆及电线. 中国电力出版社, 北京, 10, 12-13.
|
[2]
|
李海帆 (2004) 电力电缆工程设计、安装、运行、检修技术实用手册. 当代中国音像出版社, 北京, 58-61.
|
[3]
|
史传卿 (2002) 电力电缆. 中国电力出版社, 北京, 41-43.
|
[4]
|
刘帆, 陈柏超, 卞利钢 (2003) 变电站二次电缆屏蔽层接地方式探讨. 电网技术, 2, 22-24.
|
[5]
|
王敏 (2002) 10 kV单相电力电缆屏蔽层的感应电压和环流. 高电压技术, 5, 4-6.
|