轮胎滚动噪声的研究浅析
Study of Tire Rolling Noise
DOI: 10.12677/OJTT.2016.55014, PDF, HTML, XML, 下载: 2,137  浏览: 4,981  国家科技经费支持
作者: 黄 健, 满忠雷, 刘晓民:山东出入境检验检疫局检验检疫技术中心,山东 青岛;宋 慧, 李廷希:山东科技大学,山东 青岛
关键词: 轮胎噪声产生原理影响因素低噪轮胎Tire Noise Generating Principle Influencing Factors Low Noise Tires
摘要: 随着汽车行业的发展,车辆噪声越来越受到人们的关注,车辆噪声的主要来源是轮胎噪声,因此,对轮胎噪声的研究也越来越广泛。本文主要介绍了轮胎噪声的研究历史,轮胎噪声产生的原理以及轮胎噪声的影响因素等。最后,还叙述了降低轮胎噪声的几个简单方法,它们分别为:采用低噪声路面、优化轮胎的花纹结构和改变胎面胶材料。这些研究为改进和完善轮胎制造方法创造了条件。
Abstract: Vehicle noise has attracted more and more attention because of the development of the automo-tive industry. Vehicle tire noise is the main source of noise, so, we are increasingly studying tire noise. This paper described the study of the history of the tire noise, the principle of the tire noise and the factors of the tire noise. Finally, we also described a few simple ways including using the low-noise pavement, optimizing the structure of the tire tread and changing the tread rubber material to reduce tire noise. This study has created the conditions for improving and perfecting the tire manufacturing methods.
文章引用:黄健, 满忠雷, 刘晓民, 宋慧, 李廷希. 轮胎滚动噪声的研究浅析[J]. 交通技术, 2016, 5(5): 111-117. http://dx.doi.org/10.12677/OJTT.2016.55014

参考文献

[1] 顾尚华. 道路交通噪声的危害与控制措施[J]. 交通与运输, 2003(2): 24-25.
[2] 董毛华, 李明, 闫芳. 轿车子午线轮胎噪声探讨[J]. 轮胎工业, 2009, 29(1): 24-29.
[3] 于清溪. 轮胎噪声(静音)的探讨[J]. 橡胶技术与装备, 2013, 39(4): 6-20.
[4] 刘海潮, 葛剑敏. 变节距花纹轮胎噪声特性研究[J]. 声学技术, 2015, 34(2): 369-372.
[5] 冯希金, 危银涛, 冯启章, 等. 轮胎噪声研究进展[J]. 轮胎工业, 2015, 35(9): 515-523.
[6] William, A.L. (1973) Tire Road Interaction Noise. The Journal of the Acoustical Society of America, 53, 317.
http://dx.doi.org/10.1121/1.1982295
[7] 于增信, 谭惠丰, 杜星文. 轮胎花纹沟噪声研究进展[J]. 哈尔滨工业大学学报, 2002, 34(1): 105-109.
[8] Archibald, F.R. (1974) An Elementary Analysis of a Vehicle Tire Tread Noise Source. Journal of Sound and Vibration, 34, 285-286.
http://dx.doi.org/10.1016/S0022-460X(74)80311-1
[9] Hillquist, R.K. and Carpenter, P.C. (1973) A Basic Study of Automobile Tire Noise. The Journal of the Acoustical Society of America, 54, 331.
http://dx.doi.org/10.1121/1.1978329
[10] 范俊岩. 轮胎噪声研究的现状与发展[J]. 轮胎工业, 2006, 26(4): 195-197.
[11] Heckl, M. (1986) Tyre Noise Generation. WEAR, 113, 157-170.
http://dx.doi.org/10.1016/0043-1648(86)90065-7
[12] Campos, F. and Herbelleau, Y. (1987) Reduction of the Travel Noise of Tires. The Journal of the Acoustical Society of America, 81, 582.
http://dx.doi.org/10.1121/1.394860
[13] Killian, L.W. (1994) Reduced Noise Generating Tread Pattern for a Tire. The Journal of the Acoustical Society of America, 96, 617-618.
http://dx.doi.org/10.1121/1.410411
[14] Kropp, W., Larsson, K. and Barrelet, S. (1998) The Influence of Belt and Tread Band Stiffness on the Tire Noise Generation Mechanisms. The Journal of the Acoustical Society of America, 103, 2919.
http://dx.doi.org/10.1121/1.422108
[15] 贺海留. 轮胎对车辆噪声产生的影响[J]. 橡胶工业, 1996, 43(3): 172-181.
[16] 毕义成. 轮胎噪音产生机理和测试方法的研究[D]: [硕士学位论文]. 青岛: 青岛科技大学, 2013.
[17] 吴灿. 载重轮胎花纹噪声及其降噪方法的研究[D]: [硕士学位论文]. 武汉: 武汉理工大学, 2010.
[18] 陈理君, 周玲, 肖旺新, 陈弘. 道路/轮胎噪声分析及其降噪路径[J]. 轮胎工业, 2009, 29(11): 654-658.
[19] 王万英, 靳晓雄. 汽车整车轮胎噪声研究[J]. 上海汽车, 2008(7): 22-24.
[20] 赵书凯, 邓世涛, 丁海峰, 姜晓辉. 轮胎噪声影响因素及低噪声轮胎设计方法[J]. 轮胎工业, 2014, 34(2): 76-80.
[21] 蔡旭, 王端宜. 轮胎/路面噪音室内测量系统研究[J]. 土木建筑与环境工程, 2011, 33(S1): 161-165.
[22] 利用旧轮胎铺路减少噪音技术[J]. 珠江经济, 1999(8): 14.
[23] 荣英飞, 丁海峰, 于利刚, 苗岱江. 低噪声轮胎的设计理念与技术分析[J]. 轮胎工业, 2013, 33(3): 131-134.
[24] 李正江, 姜张华. 轮胎噪声浅析[J]. 轮胎工业, 2012, 32(8): 451-454.
[25] 葛志伟, 李炳辉. 汽车的轮胎噪声[J]. 世界汽车, 1999(11): 23-24.
[26] 陈理君, 杨唐胜, 杨立, 等. 低噪声轮胎花纹结构参数优化方法[J]. 轮胎工业, 2002, 22(12): 720-928.
[27] 陈理君, 张艳堃, 杨立, 杨光大. 低噪声轮胎花纹设计原理与方法[J]. 轮胎工业, 2001, 21(5): 270-276.
[28] 陈理君, 李晓辉, 杨立, 杨光大. 轮胎花纹噪声及其降噪方法[J]. 噪声与振动控制, 2004, 24(1): 10-13.
[29] 何剑峰, 靳晓雄, 彭为, 王万英. 轮胎花纹对车内噪声声品质影响的研究[J]. 汽车工程, 2012, 34(4): 345-350.