马氏体相变唯象“理论”的评述—五评马氏体相变的切变学说
The Commentary onPhenomenological Theory of Martensite Phase Transformation—The Fifth Commentary on Shear Theory
DOI: 10.12677/MS.2014.44018, PDF, HTML,  被引量 下载: 3,259  浏览: 9,934  科研立项经费支持
作者: 刘宗昌, 计云萍, 任慧平:内蒙古科技大学,材料与冶金学院,包头
关键词: 唯象学说马氏体相变切变贝茵应变浮凸矩阵式Phenomenological Theory Martensite Phase Transformation Shear Bain Strain Surface Relief Matrix
摘要: 研究马氏体相变晶体学具有重要理论意义。本文简述并评价了唯象学说,指出:1) 以贝茵应变使母相转变为马氏体,缺乏热力学可能性,贝茵应变B作为计算数据,不可靠; 2) 马氏体浮凸是相变体积变化所致,与切变无关,浮凸普遍为帐篷型(∧),矩阵计算式中的形状应变F与马氏体相变晶体学没有直接的联系;3) 点阵不变切变缺乏热力学可能性,在实际的马氏体相变中不存在简单切变(S)。同样,刚性转动也是虚构的;4) 唯象学说与马氏体相变实际不符,应予摈弃。
Abstract: It is of theoretical significance to study the crystallography of martensite phase transformation. The phenomenological theory was briefly described and evaluated. The proposed viewpoints are as follows. 1) The transformation from austenite to martensite through the Bain strain lacks of the thermodynamics possibility. Moreover, it is unreliable to use the Bain strain (B) as the calculating data; 2) The surface relief of martensite, which is generally in tent (∧) type, results from the bulk expansion during martensite phase transformation and has nothing to do with the shear. The shape strain (F) in the matrix calculation formula is not directly relevant to the crystallography of martensite phase transformation; 3) The lattice invariance shear is short of the thermodynamic feasibility. No simple shear (S) exists in the actual martensite phase transformation, similarly, the rigid rotation is imaginary; 4) The phenomenological theory doesn’t conform to the reality of martensite phase transformation and should be abandoned.
文章引用:刘宗昌, 计云萍, 任慧平. 马氏体相变唯象“理论”的评述—五评马氏体相变的切变学说[J]. 材料科学, 2014, 4(4): 119-126. http://dx.doi.org/10.12677/MS.2014.44018

参考文献

[1] Wechsler, M.S., et al. (1953) Transactions of AIME, 197, 1503.
[2] Bowles, J.S. and Mackenzie, J.K. (1954) The crystallography of martensite transformations. Acta Metallurgica, 2, 129-137.
[3] 徐祖耀 (l980) 马氏体相变与马氏体. 科学出版社, 北京, 263, 259, 399-403, 384-390.
[4] 刘宗昌, 任慧平, 安胜利 (2012) 马氏体相变. 科学出版社, 北京, 204-210.
[5] 陈景榕, 李承基 (1997) 金属与合金中的固态相变. 冶金工业出版社, 北京, 145-148.
[6] 刘宗昌, 袁长军, 计云萍, 任慧平 (2010) 马氏体的形核及临界晶核的研究. 金属热处理, 11, 18-22.
[7] 林小娉, 张勇, 谷南驹, 孟昭伟, 马晓丽 (2001) γ(fcc)-α(bcc)马氏体相变表面浮凸的AFM观察和定量分析. 材料热处理学报, 4, 4-9.
[8] 刘宗昌, 王海燕, 任慧平 (2009) 过冷奥氏体转变产物的表面浮凸. 中国体视学与图像分析, 3, 227-236.
[9] 刘宗昌, 王海燕, 林学强, 任慧平 (2010) Fe-15Ni-0.6C合金马氏体浮凸及相变新机制. 热处理, 6, 15-21.
[10] 方鸿生, 王家军, 杨志刚, 李春明, 薄祥正, 郑燕康 (1999) 贝氏体相变. 科学出版社, 北京, 298-299.
[11] 《金属机械性能》编写组 (1978) 金属机械性能. 机械工业出版社, 北京, 23-24.
[12] Aaronson, H.I. (1969) The mechanism of phase transformations in crystalline. Institure of Metals, London, 2790.
[13] 刘宗昌, 计云萍, 林学强, 王海燕, 任慧平 (2010) 三评马氏体相变的切变机制. 金属热处理, 2, 1-6.
[14] 宗昌, 计云萍, 王海燕, 任慧平 (2011) 四评马氏体相变的切变机制. 金属热处理, 8, 63-66.
[15] 谭玉华, 马跃新 (2013) 马氏体新形态学. 冶金工业出版社, 北京, 26-27.