Mobile version of Hanspub

文章引用说明 更多>> (返回到该文章)

Chang, Y.N., Zhang, M., Xia, L., Zhang, J. and Xing, G. (2012) The Toxic Effects and Mechanisms of CuO and ZnO Nano-particles. Materials, 12, 2850-2871.


  • 标题: 阳极氧化黄铜构建纳米片氧化物薄膜及其光电化学性能Preparation of Nanosheet Copper Oxide Films by Anodic Oxidation of a Brass and Their Photoelectrochemical Performance

    作者: 胡浩, 肖仕清, 许敏, 牛振江

    关键字: 铜锌合金, NaOH, 氧化膜, 光电流Zinc-Copper Alloy, NaOH, Oxide Film, Photocurrent

    期刊名称: 《Material Sciences》, Vol.6 No.3, 2016-05-30

    摘要: 在55℃的1.0~10.0 mol∙L−1 NaOH溶液中,通过10 mA∙cm−2恒电流阳极氧化和空气中150℃热处理,在黄铜基底表面制备出具有纳米颗粒或纳米片形貌的铜氧化物薄膜。利用XRD、SEM和Raman光谱等分析了氧化膜的结构和形貌。在0.1 mol∙L−1 Na2SO4溶液中测试了氧化膜在零偏压下的可见光光电流。结果表明,黄铜在3.0~5.0 mol∙L−1的NaOH溶液中经阳极氧化,可制备出具有纳米片形貌的Cu2O/CuO复合氧化物薄膜,在零偏压下的光电流密度分别为1.9和1.4 μA∙cm−2。 Copper oxide films with nanoparticles or nanosheets morphologies were prepared on the surface of brass substrates through anodic oxidation of the brass at 10 mA∙cm−2 in 1.0 - 10.0 mol∙L−1 NaOH solutions, at 55˚C, then heated at 150˚C in air. The structures and morphologies of the oxide films were analysed with XRD, SEM and Raman spectroscopy. The photocurrents of the films were tested in 0.1 mol∙L−1 Na2SO4 solution under a visible light and zero bias. Results show that nanosheet CuO/Cu2O composite films can be obtained by anodic oxidation of the brass in 3.0 - 5.0 mol∙L−1 NaOH solutions, and the films generate the photocurrents of 1.9 and 1.4 μA∙cm−2, respectively, at zero bias.