开关磁阻电机速度控制
Speed Control Strategy of Switched Reluctance Motor
摘要:
针对开关磁阻电机的调速控制系统的起动方式和速度控制开展研究,采用两相绕组通电起动的方式,以增大转矩、减小转矩脉动。提出了模糊–自适应整定PID控制算法,并以STM32 + FPGA为主控制器,应用低速电流斩波、高速角度位置控制方式设计了开关磁阻电机调速系统。对于解决超调量高、动态响应慢的不足、精确度不高的问题有一定的效果。实验结果表明,系统转速的精确度在10 r/min之内,最大超调量为15 r/min。
Abstract:
Aimed at research on starting mode and speed control of switched reluctance motor speed control system, a two-phase starting is adopted to start the electric, in order to increase the torque and reduce the torque ripple. A fuzzy adaptive PID control algorithm is proposed, and a switched reluctance motor speed control system with STM32 + FPGA as the main controller is designed, applying current chopping in low speed and angle position control mode in high speed, which has a certain effect on solving the problems of high overshoot, slow dynamic response and low accuracy. The experimental results show that the precision of the system speed is within 10 r/min, and the maximum overshoot is 15 r/min.
参考文献
[1]
|
周涛. 电动自行车用开关磁阻电机驱动系统的研究与实践[D]: [硕士学位论文]. 武汉: 华中科技大学, 2006.
|
[2]
|
刘芸芸. 基于196单片机的开关磁阻电机调速系统设计[D]: [硕士学位论文]. 杭州: 浙江大学, 2005.
|
[3]
|
宋伟官. 基于DSP的开关磁阻电机控制系统研究[D]: [硕士学位论文]. 大连: 大连理工大学, 2005.
|
[4]
|
吴红星. 开关磁阻电机系统理论与控制技术[M]. 北京: 中国电力出版社, 2010: 35-30.
|
[5]
|
孔辉. 开关磁阻电机智能调速控制系统的开发[D]: [硕士学位论文]. 青岛: 青岛工业大学, 2012.
|
[6]
|
石磊. 开关磁阻电机起动过程的研究[D]: [硕士学位论文]. 西安: 西安科技大学, 2010.
|
[7]
|
张魁. 电动车用小功率开关磁阻电机及系统的设计与分析西安[D]: [硕士学位论文]. 济南: 山东大学, 2010.
|
[8]
|
温浩. 开关磁阻电机调速系统研究与设计[D]: [硕士学位论文]. 杭州: 浙江大学, 2012.
|
[9]
|
金英. 3 KW开关磁阻电机调速系统设计[D]: [硕士学位论文]. 杭州: 浙江大学, 2005.
|
[10]
|
段鑫. 基于开关磁阻电机通用控制器的研究[D]: [硕士学位论文]. 长沙: 中南大学, 2013.
|