[1]
|
Scrosati, B. and Garche, J. (2009) Lithium Batteries: Status, Prospects and Future. Journal of Power Sources, 195, 2419-2430. https://doi.org/10.1016/j.jpowsour.2009.11.048
|
[2]
|
曹勇, 严长青, 王义飞, 等. 高安全高比能量动力锂离子电池系统路线探索[J]. 储能科学与技术, 2018, 7(3): 384-393.
|
[3]
|
安富强, 赵洪量, 程志, 等. 纯电动车用锂离子电池发展现状与研究进展[J]. 工程科学学报, 2019, s41(1): 22-42.
|
[4]
|
Waldmann, T., Scurtu, R.G., Richter, K., et al. (2020) 18650 vs. 21700 Li-Ion Cells—A Direct Comparison of Electrochemical, Thermal, and Geomet-rical Properties. Journal of Power Sources, 472, Article ID: 228614.
https://doi.org/10.1016/j.jpowsour.2020.228614
|
[5]
|
卢红红, 梁广川, 陈洪建, 等. 三元LiNi0.5Co0.2Mn0.3O2铝壳锂离子动力电池的性能研究[J]. 电源技术, 2017, 41(2): 181-182.
|
[6]
|
张学建, 张艳, 胡亚召. 聚合物锂离子电池软包装铝塑膜的研究进展[J]. 信息记录材料, 2013, 14(6): 42-48.
|
[7]
|
李永安, 徐立球, 李学兵. 聚合物锂离子蓄电池芯软包装材料的设计[J]. 电源技术, 2003, 27(6): 512-514.
|
[8]
|
李文俊, 徐航宇, 杨琪, 等. 高能量密度锂电池开发策略[J]. 储能科学与技术, 2020, 9(2): 448-478.
|
[9]
|
徐冰, 谭志清, 吴慧斌. 锂离子电池铝塑复合膜软包装材料综述[J]. 广州化工, 2019, 47(19): 22-25.
|
[10]
|
Zhou, L., Xing, L., Zheng, Y., et al. (2020) A Study of External Surface Pressure Effects on the Properties for Lithium-Ion Pouch Cells. International Journal of Energy Research, 44, 6778-6791. https://doi.org/10.1002/er.5415
|
[11]
|
龚明光, 朱顺良, 谢欢. 电动汽车锂离子电池系统轻量化技术现状及发展趋势[J]. 时代汽车, 2019(4): 89-92.
|
[12]
|
Ge, C., Verma, S.S., Burruto, J., et al. (2021) Effects of Flexing, Optical Density, and Lamination on Barrier and Mechanical Properties of Metallized Films and Aluminium Foil Centered Laminates Prepared with Polyethylene Terephthalate and Linear Low Density Polyethylene. Journal of Plastic Film & Sheeting, 37, 205-225.
https://doi.org/10.1177/8756087920963532
|
[13]
|
Svens, P., Kjell, M.H., Tengstedt, C., et al. (2013) Li-Ion Pouch Cells for Vehicle Applications—Studies of Water Transmission and Packing Materials. Energies, 6, 400-410. https://doi.org/10.3390/en6010400
|
[14]
|
Yoo, J.E., Roev, V., Bae, J., et al. (2020) Multifunctional Hybrid Polymer Nanocomposites for Automotive Battery Packaging. Journal of Applied Polymer Science, 137, 49059. https://doi.org/10.1002/app.49059
|
[15]
|
刘亚明, 王艳飞, 黄磊, 等. 锂离子电池铝塑膜腐蚀的预测方法[J]. 电池, 2017, 47(1): 27-30.
|
[16]
|
赵越, 肖艳春, 崔佳, 等. 锂离子电池电芯铝塑膜外壳冲压成形工艺[J]. 锻压技术, 2017, 42(7): 48-54.
|
[17]
|
范洋, 郭战胜, 徐艺伟, 等. 软包装锂离子电池铝塑复合膜的热封工艺[J]. 储能科学与技术, 2016, 5(1): 85-90.
|
[18]
|
Cho, J.M., Kim, D.H., Yoo, M.S., et al. (2018) Fabrication and Evaluation of Aluminum Laminated Film for a Pouch-Type Secondary Battery. Journal of Nanoscience and Nanotechnology, 18, 2752-2757.
https://doi.org/10.1166/jnn.2018.14267
|
[19]
|
Du, J.D., Ding, D.Y., Zhang, W.L., et al. (2018) Effect of Ce Addition on the Microstructure and Properties of Al-Cu-Mn-Mg-Fe Lithium Battery Shell Alloy. Materials Characterization, 142, 252-260.
https://doi.org/10.1016/j.matchar.2018.05.049
|
[20]
|
Lee, S.H., Yang, S.W., Park, E.S., et al. (2019) High-Performance Adhesives Based on Maleic Anhydride-g-EPDM Rubbers and Polybutene for Laminating Cast Poly-propylene Film and Aluminum Foil. Coatings, 9, 61.
https://doi.org/10.3390/coatings9010061
|
[21]
|
Lampi, R.A. (1980) Retort Pouch: The Development of a Basic Packaging Concept in Today’s High Technology Era. Journal of Food Process Engineering, 4, 1-18. https://doi.org/10.1111/j.1745-4530.1980.tb00244.x
|
[22]
|
Catauro, P.M. and Perchonok, M.H. (2012) Assessment of the Long-Term Stability of Retort Pouch Foods to Support Extended Duration Spaceflight. Journal of Food Science, 77, S29-S39.
https://doi.org/10.1111/j.1750-3841.2011.02445.x
|
[23]
|
江琦. 蒸煮袋的发展及其应用[J]. 食品工业科技, 1979(1): 17-21.
|
[24]
|
罗欣怡. 一种软包装锂离子电池的封装技术[J]. 仪器仪表用户, 2018, 25(8): 21-25.
|
[25]
|
刘继福, 郭纯武, 刘嘉鑫. 聚合物锂电池软包装材料的瓶颈突破[J]. 中国包装, 2012, 32(7): 51-58.
|
[26]
|
任宁, 孙延先, 吴耀辉, 等. 软包装锂离子电池铝塑膜的腐蚀行为[J]. 有色金属工程, 2015, 5(5): 29-32.
|
[27]
|
史册. 软包装锂离子电芯腐蚀分析[J]. 电池工业, 2017, 21(6): 10-14.
|
[28]
|
魏保花, 陆佳平. 微小缺陷对铝塑复合软包装材料阻隔性影响的研究[J]. 包装工程, 2009, 30(9): 13-15.
|
[29]
|
中国化学与物理电源行业协会. T/CIAPS0005-2018. 锂离子电池用铝塑复合膜[S]. 2018.
|
[30]
|
章结兵, 石亚丽, 韩梓涛. 软包锂离子电池封装铝塑膜材料保护机理分析及其测试方法[J]. 塑料工业, 2018, 46(11): 5-8, 50.
|
[31]
|
张鹏博, 张晓华, 王训, 等. 锂离子电池用铝塑复合膜精密冲压工艺研究[J]. 热加工工艺, 2016, 45(7): 167-170.
|
[32]
|
Muñoz, L., Pineda, F., Martínez, C., et al. (2018) Improving the Interaction between Aluminum Surfaces and Polymer Coatings. Surface & Coatings Technology, 358, 435-442. https://doi.org/10.1016/j.surfcoat.2018.11.051
|
[33]
|
Nakanishi, S., Suzuki, T., Cui, Q., et al. (2014) Effect of Surface Treatment for Aluminum Foils on Discharge Properties of Lithium-Ion Battery. Transactions of Nonferrous Metals Society of China, 24, 2314-2319.
https://doi.org/10.1016/S1003-6326(14)63350-1
|
[34]
|
Rudawska, A., Danczak, I., Müller, M., et al. (2016) The Effect of Sandblasting on Surface Properties for Adhesion. International Journal of Adhesion and Adhesives, 70, 176-190. https://doi.org/10.1016/j.ijadhadh.2016.06.010
|
[35]
|
Becker, M. (2019) Chromate-Free Chemical Conver-sion Coatings for Aluminum Alloys. Corrosion Reviews, 37, 321-342. https://doi.org/10.1515/corrrev-2019-0032
|
[36]
|
Campestrini, P., Westing, E.V. and Wit, J.D. (2001) Influence of Surface Preparation on Performance of Chromate Conversion Coatings on Alclad 2024 Aluminium Alloy. Electro-chimica Acta, 46, 2631-2647.
https://doi.org/10.1016/S0013-4686(01)00476-5
|
[37]
|
Xia, F. and Xu, S.A. (2013) Effect of Surface Pre-Treatment on the Hydrophilicity and Adhesive Properties of Multilayered Laminate Used for Lithium Battery Packaging. Applied Surface Science, 268, 337-342.
https://doi.org/10.1016/j.apsusc.2012.12.091
|
[38]
|
胡立泓, 张锦桐, 王丽云, 等. 高阻隔铝塑膜辉光放电发射光谱深度谱测量参数的优化[J]. 光谱学与光谱分析, 2022, 42(6): 120-123.
|
[39]
|
Kulinich, S.A., Akhtar, A.S., Susac, D., et al. (2006) On the Growth of Conversion Chromate Coatings on 2024-Al Alloy. Applied Surface Science, 253, 3144-3153. https://doi.org/10.1016/j.apsusc.2006.07.004
|
[40]
|
朱祖芳. 铝合金化学转化处理技术的进展及工业应用[J]. 材料保护, 2003, 36(3): 1-4.
|
[41]
|
Matzdorf, C., Kane, M. and Green, J. (2004) Corrosion Resistant Coatings for Aluminum and Aluminum Alloys. US Patent No. 6375726.
|
[42]
|
Rodriguez, D. and Chidambaram, D. (2013) Mo-lybdate-Based Conversion Coatings for Aluminum Alloys Part II: Coating Chemistry. Ecs Transactions, 45, 91-103. https://doi.org/10.1149/04519.0091ecst
|
[43]
|
Lunder, O., Simensen, C., Yu, Y., et al. (2003) Formation and Characterisation of Ti-Zr Based Conversion Layers on AA6060 Aluminium. Surface & Coatings Technology, 184, 278-290. https://doi.org/10.1016/j.surfcoat.2003.11.003
|
[44]
|
Mishra, A.K. and Balasubramaniam, R. (2006) Corrosion Inhibition of Aluminum Alloy AA2014 by Rare Earth Chlorides. Corrosion Science, 49, 1027-1044. https://doi.org/10.1016/j.corsci.2006.06.026
|
[45]
|
Liang, C.S., Lv, Z.F., Zhu, Y.L., et al. (2014) Molybdate-Based Conversion Treatment for Improving the Peeling Strength between Aluminum Foil and Polypropylene Grafted with Glycidyl Methacrylate. Surface & Coatings Technology, 249, 1-5. https://doi.org/10.1016/j.surfcoat.2014.03.038
|
[46]
|
Gu, Y.Y., Wang, S.N. and Xu, S.A. (2019) Preparation and Adhesive Properties of Colored Ti/Zr-Based Conversion Coating on Aluminum Foil for Lithium Battery Packaging. Surface and Interface Analysis, 51, 190-198.
https://doi.org/10.1002/sia.6564
|
[47]
|
Xu, S.A., Wang, S.N. and Gu, Y.Y. (2019) Microstructure and Adhesion Properties of Cerium Conversion Coating Modified with Silane Coupling Agent on the Aluminum Foil for Lithium Ion Battery. Results in Physics, 13, Article ID: 102262. https://doi.org/10.1016/j.rinp.2019.102262
|
[48]
|
Wang, S.N. and Xu, S.A. (2021) Ti/Cr(III) Conversion Coating on Aluminium Foil for Lithium-Ion Battery Package. Surface Engineering, 37, 365-372. https://doi.org/10.1080/02670844.2020.1742449
|
[49]
|
崔珊, 安成强, 郝建军. 铝及铝合金无铬钝化研究进展[J]. 表面技术, 2016, 45(6): 63-69.
|
[50]
|
Shimakur, T., Sasaki, M., Yamasoe, K., et al. (2002) Non-Chromate Metallic Surface-Treating Agent, Method for Surface Treatment, and Treated Steel Material. US Patent No. 6475300.
|
[51]
|
Naderi, R., Fedel, M., Deflorian, F., et al. (2013) Synergistic Effect of Clay Nanoparticles and Ce-rium Component on the Corrosion Behavior of Eco-Friendly Silane Sol-Gel Layer Applied on Pure Aluminum. Surface & Coatings Technology, 224, 93-100. https://doi.org/10.1016/j.surfcoat.2013.03.005
|
[52]
|
Lakshmi, R.V., Sampath, S. and Aruna, S.T. (2021) Silica-Alumina Based Sol-Gel Coating Containing Cerium Oxide Nanofibers as a Potent Al-ternative to Conversion Coating for AA2024 Alloy. Surface & Coatings Technology, 411, Article ID: 127007. https://doi.org/10.1016/j.surfcoat.2021.127007
|
[53]
|
Lee, K.H., Kim, B.J., Yoon, S.H., et al. (2009) Durability Improvement of Co-Cured Carbon/Epoxy Composite-Aluminum Laminate with Nano-Size Carbon Black at Cryogenic Temperature. Journal of Adhesion Science and Technology, 23, 639-649. https://doi.org/10.1163/156856108X379146
|
[54]
|
Sah, S. and Gao, R.X. (2011) An Experimental Study of Contact Pressure Distribution in Panel Stamping Operations. The International Journal of Advanced Manufacturing Technology, 55, 121-132.
https://doi.org/10.1007/s00170-010-3050-3
|
[55]
|
Lederer, M., Gröger, V., Khatibi, G., et al. (2009) Size Dependency of Mechanical Properties of High Purity Aluminium Foils. Materials Science & Engineering A, 527, 590-599. https://doi.org/10.1016/j.msea.2009.08.016
|
[56]
|
Mueller, K., Schoenweitz, C. and Langowski, H.C. (2012) Thin Laminate Films for Barrier Packaging Application-Influence of Down Gauging and Substrate Surface Properties on the Permeation Properties. Packaging Technology and Science, 25, 137-148. https://doi.org/10.1002/pts.966
|
[57]
|
Ju, J., Yang, L., Hao, S., et al. (2017) Microstructure, Martensite Transition and Mechanical Properties Investigations of Poly-crystalline Co-Ni-Al Alloys with Er Doping. Journal of Materials Engineering and Performance, 26, 1062-1068.
https://doi.org/10.1007/s11665-017-2542-9
|
[58]
|
Zhang, R., Ding, D.Y., Zhang, W.L., et al. (2018) Al-1.5Fe-xLa Alloys for Lithium-Ion Battery Package. Metals, 8, 890. https://doi.org/10.3390/met8110890
|
[59]
|
Wang, L.P., Cao, G.J., Zhang, J.J., et al. (2013) Effect of Combined RE-Ba-Sb Addition on Microstructure and Mechanical Properties of 4004 Aluminum Alloy. Transactions of Nonferrous Metals Society of China, 23, 2236-2242.
https://doi.org/10.1016/S1003-6326(13)62723-5
|
[60]
|
Zhao, H.L., Yao, D.M., Qiu, F., et al. (2011) High Strength and Good Ductility of Casting Al-Cu Alloy Modified by PrxOy and LaxOy. Journal of Alloys & Compounds, 509, L43-L46. https://doi.org/10.1016/j.jallcom.2010.09.059
|
[61]
|
Ju, J., Liu, H., Shuai, L.G., et al. (2018) Martensite Transformation and Mechanical Properties of Polycrystalline Co-Ni-Al Alloys with Gd Doping. Journal of Technology & Science, 8, 848. https://doi.org/10.3390/met8100848
|
[62]
|
Li, J.H., Li, Q., Zhang, F.C., et al. (2015) Effects Boron on Microstructure and Mechanical Properties of Zr3Al-Based Alloys. Materials Letters, 153, 70-72. https://doi.org/10.1016/j.matlet.2015.04.001
|
[63]
|
李晓光, 杨文兵, 单易, 等. 轻合金电致塑性成形技术研究进展[J]. 模具技术, 2020(4): 56-63.
|
[64]
|
Guan, L., Tang, G.Y. and Chu, K.P. (2010) Recent Advances and Challenges in Electroplastic Manufacturing Processing of Metals. Journal of Materials Research, 25, 1215-1224. https://doi.org/10.1557/JMR.2010.0170
|
[65]
|
Yu, M., Song, M., Kim, M., et al. (2019) Experimental Study on the Formability of Aluminum Pouch for Lithium Polymer Battery by Manufacturing Processes. Journal of Mechanical Science and Technology, 33, 4353-4359.
https://doi.org/10.1007/s12206-019-0831-y
|
[66]
|
Devisme, S., Haudin, J.M., Agassant, J.F., et al. (2010) Adhesion in Polypropylene/Aluminum Laminates Made by Extrusion Coating. Journal of Applied Polymer Science, 112, 2609-2624. https://doi.org/10.1002/app.29760
|
[67]
|
关玉明, 赵越, 崔佳, 等. 软包锂电池电芯封装铝塑膜外壳拉深工艺[J]. 中国机械工程, 2019, 30(8): 988-993.
|
[68]
|
Li, G., Long, X.Y., Yang, P., et al. (2018) Advance on Friction of Stamping Forming. International Journal of Advanced Manufacturing Technology, 96, 21-38. https://doi.org/10.1007/s00170-017-1538-9
|
[69]
|
Xiao, W.C., Wan, B.Y., Kang, Y., et al. (2017) Deep Drawing of Aluminum Alloy 7075 Using Hot Stamping. Rare Metals, 36, 485-493. https://doi.org/10.1007/s12598-017-0919-4
|
[70]
|
Guo, Z.S., Fan, Y. and Du, S.Y. (2016) Influence of Lithium Hexafluorophosphate/Ethylene Carbonate/Dimethyl Carbonate Electrolyte Soaking on Heat Seal Strength of Polyamide 6/Aluminum/Cast-polypropylene Laminates Used as Lithium-Ion Battery Packaging. Journal of Plastic Film & Sheeting, 34, 10-26.
https://doi.org/10.1177/8756087916686141
|
[71]
|
刘继福. 用于聚合物锂离电池软包装膜的双组份聚氨酯树酯胶粘剂[P]. 中国, 102329594A. 2012-01-25.
|
[72]
|
Torró-palau, A.M., Fernández-garcía, J.C., Orgilés-barceló, A.C., et al. (2001) Characterization of Polyurethanes Containing Different Silicas. International Journal of Adhesion and Adhesives, 21, 1-9.
https://doi.org/10.1016/S0143-7496(00)00021-X
|
[73]
|
Liang, C.S., Lv, Z.F., Bo, Y., et al. (2015) Effect of Modified Polypropylene on the Interfacial Bonding of Polymer-Aluminum Laminated Films. Materials & Design, 81, 141-148. https://doi.org/10.1016/j.matdes.2015.05.021
|
[74]
|
Shen, C.Y. and Xv, S.A. (2019) Effect of Co-Monomer on the Adhesive Performance of PP-g-MAH between Cast Polypropylene Film and Aluminum Foil. Materials Research Ex-press, 7, Article ID: 015316.
https://doi.org/10.1088/2053-1591/ab6258
|
[75]
|
徐世爱, 夏飞, 梁昌盛, 等. 一种锂电池软包装用环氧粘合剂和锂电池软包装材料[P]. 中国, 102703010A. 2012-10-03.
|
[76]
|
吕尚书. 软包锂离子电池铝塑膜的热封性能研究[J]. 功能材料, 2019, 50(7): 7115-7119.
|
[77]
|
秦楠, 周正发, 谢文汇, 等. 锂离子电池软包装用CPP薄膜热封特性的研究[J]. 包装工程, 2009, 30(11): 4-6.
|
[78]
|
Guo, Z.S. and Fan, Y. (2016) Heat Seal Properties of Polymer-Aluminum-Polymer Composite Films for Application in Pouch Lithium-Ion Battery. RSC Advances, 6, 8971-8979. https://doi.org/10.1039/C5RA27097A
|
[79]
|
Jang, J.H. and Ahn, S.H. (2017) Numerical and Experimental Analysis of Heat Sealing of Multi-Layered Laminate Films Used in Lithium Polymer Battery Packaging. Journal of Plastic Film & Sheeting, 33, 142-167.
https://doi.org/10.1177/8756087916647092
|
[80]
|
张微. 新能源汽车电池技术发展瓶颈分析及对策研究[J]. 金属功能材料, 2021, 28(1): 78-84.
|
[81]
|
崔海星, 马晨. 锂离子电池用铝塑膜典型企业专利分析[J]. 电池, 2019, 49(6): 528-531.
|