环氧玻璃钢管固化方式研究
Study on the Curing Method of Epoxy FRP Pipes
DOI: 10.12677/MS.2015.53013,
PDF, HTML, XML,
被引量
下载:
2,553 浏览:
6,890
作者:
丁建兵, 于晓蕾, 宋 波, 陈小娟, 潘彩红, 汪 强:江苏神马电力股份有限公司,江苏 南通
关键词:
玻璃钢管;固化;热辐射;红外微波;内加热;FRP Pipes; Curing; Heat Radiation; Infrared Microwave; Internal Heating
摘要:
随着纤维增强玻璃钢管的固化方式多样化,进一步增加了玻璃钢产品的可设计性。本文主要研究了传统的热辐射、红外微波及内加热三种加热固化方式;当产品壁厚较薄可使用红外微波固化方式,当产品壁厚较厚、内压力较高可使用内加热固化方式。工程师可以根据自己产品的性能特点,选择合适的固化方式。
Abstract: The diversification of the methods for curing FRP tube further makes FRP products devisable. This paper mainly focuses on researching three kinds of curing methods, including the traditional thermal radiation, infrared heating in the microwave and the inner heating curing. Infrared mi-crowave curing methods can be applied if the wall is thin, while the heat curing methods should be used if the wall is thick and internal pressure is high. Engineers can choose the appropriate way of curing, according to the performance characteristics of products.
参考文献
[1]
|
马斌 (2003) 复合空心绝缘子产品及其制造技术. 变压器, 8, 35-37.
|
[2]
|
张宝华, 叶俊丹, 陈斌, 等 (2009) 固化温度对环氧树脂固化物性能的影响. 塑料工业, 9, 64-66.
|
[3]
|
王伟 (2001) 环氧树脂固化技术及其固化剂研究进展. 热固性树脂, 3, 29-33, 37.
|
[4]
|
Nadir, B. and Albert, G. (1988) Microwave curing of epoxy resins with di-aminodiphenylmethane—IV. Average electrical power and pulse length dependence in pulsed irradiation. European Polymer Journal, 24, 265-270.
|
[5]
|
许家忠, 尤波, 胡海燕, 王雄健 (2007) 内加热固化环氧玻璃钢管制造系统. 材料科学与工艺, 1, 102-106.
|