电磁挂钩通用检查仪的设计
The Design of the General Tester of the Electromagnetic Latch Hook
摘要:
电磁挂钩是军用飞机上实施投放的主要机构,其工作可靠性需要定期检测,但目前部队没有通用的检测设备,为提高部队快速反应能力,研制了电磁挂钩通用检查仪。仪器可对各种电磁挂钩进行精确、快速、方便测试。本文给出了该仪器的设计要求,并详细介绍了硬、软件设计及主要软件流程。该仪器经投入部队使用证明可以提供挂钩的可靠性和飞机的保证能力。
Abstract: The electromagnetic latch hook is a main mechanism on the military aircraft to make delivery. Its working reliability should be tested regularly. But at present there is no general test equipment. In order to improve the quick reaction capability, a general tester of the electromagnetic latch hook is developed. The tester can make precise, rapid and convenient test. This paper gives the design requirements of the tester and elaborates the hardware and software design and the main software process. The application of the tester in the army has been proved that it can improve the reliability of the hatch hook and the support capability of the aircraft.
参考文献
[1]
|
张敏, 张劼, 张宗麟. 军用自动测试系统的发展及关键技术[J]. 航空维修与工程, 2005, (2): 49-51.
|
[2]
|
杨乐平, 李海涛, 赵勇等. LabVIEW高级程序设计[M]. 北京: 清华大学出版社, 2003: 470-485
|
[3]
|
武国庆, 杨峰. 头盔瞄准/显示系统在武装直升机上的应用研究[J]. 电光与控制, 2000, (1): 24-28
|
[4]
|
National Instruments Corporation. IMAQ vision concepts ma- nual. Austin, 2000.
|
[5]
|
黄伟. 某型飞机显控系统检查仪的设计与实现[D]. 西安电子科技大学, 2009.
|
[6]
|
雷振山. LabVIEW 8.2基础教程[M]. 北京: 中国铁道出版社, 2008.
|