流速对潜油电机壳体腐蚀与冲蚀的研究
Research of Velocity on Electric Submersible Motor Shell Corrosion and Erosion
摘要:
利用Solidworks软件,建立了潜油电机外形的仿真模型。利用Fluent软件,建立了潜油电机外表面的流场域和边界条件,并进行了网格划分。数值模拟结果表明,在潜油电机外表面与套管内壁的环空处的流速极大,并且在变径处产生一定的湍流,加剧了对潜油电机壳体金属表面的腐蚀与冲蚀。
Abstract: The simulation model of electric submersible motor configuration is built by solidworks software. The flow field of outer surface of electric submersible motor and boundary conditions are also established by means of fluent software. At the same time, the grid division of model is carried out. Numerical simulation results show that the velocity, which is located in the place between the outer surface of electric submersible motor and casing inwall hohlraum, is maximum, and there is some turbulence in changing diameter, which increases the corrosion and erosion of electric submersible motor shell.
参考文献
[1]
|
李兵, 崔晓霖, 杨英平. 潜油电泵井腐蚀机理研究及保护[J].内江科技, 2010, (2): 67, 89.
|
[2]
|
刘恒, 丁学光, 赵大龙, 赵永武. H2S腐蚀对潜油电泵机组的影响[J]. 石油化工腐蚀与防护, 2009, 26(2): 27-29.
|
[3]
|
庞向东, 刘军, 梅思杰, 迟毅. 在含CO2油井中潜油电泵机组耐腐蚀性研究[J]. 应用科技, 2003, 30(2): 56-58.
|
[4]
|
付强, 朱荣生, 李维斌. 扭曲叶片离心泵叶轮内三维湍流数值模拟[J]. 排灌机械, 2005, 23(3): 14-16.
|
[5]
|
沈海涛, 郑水英, 应光耀. 圆柱形叶片潜油离心泵流场的三维数值分析[J]. 流体机械, 2005, 33(12): 12-15.
|